At some point every kid in school started drawing these “Cool S” logos on everything they could find. It seems this is almost a worldwide phenomenon. Also known as the Stussy S, Super S, Superman S, Universal S, Pointy S, Middle School S, Graffiti S, etc.

I don't know why I modeled this, for some reason I thought about it, then thought about how to model it and then tried to model it. Then 8 had to print it. I wasn't designing to any goal or specification. 

The original size should be 125mm tall but I do not expect issues with resizing to be smaller or larger within reason. The overhangs are at 45 degrees, something most printers should be able to print without support. This model can also potentially be printed in vase mode (spiralized outer for the Cura folks). Whatever floats your benchy.

https://en.wikipedia.org/wiki/Cool_S

No specific printing recommendations other than not needing supports with a well calibrated machine. 

Cool S.stl

The Cool S Saber!

Compatible with the collapsing blades by [3dprintingworld](https://thangs.com/designer/3dprintingworld). Pictured blade was printed using the model from his [Collapsing Sith Lightsaber](https://thangs.com/designer/3dprintingworld/3d-model/Collapsing%20Sith%20Lightsaber-23598). 

For printing I recommend _against_ using a brim, it will be difficult to remove from the details on the top and bottom (or take steps to ensure there is only brim around the outer perimeters). Otherwise the more perimeters the stronger the print. The weakest part is the thread, if your collapsing blade gets suck extended be careful with applying force to push the blade back in to the handle.
For any advice printing the blade please refer to 3dprintingworld's helpful advice in his own models. 

Cool S Saber

Cool S Saber v14.stl

Models designed to be printed in TPU and worn as wristbands. Sized for kids (I used my 6 year old as a test model) but can be scaled up for adults without issue.

The models can support color printing on single material FDM printers by changing filament at specific layers. All models have layers that are great for Glow in the Dark TPU too (e.g. spiderwebs, ghost body and more). Designed for 0.2mm layer heights.

Cute Halloween TPU Wristbands

Jack-O-Band TPU Wristband.stl

Jack-O-Band TPU Wristband (Plain Base).stl

Witches_Ghosts_Bats TPU Wristband.stl

Aliens and UFOs Band v33.stl

Skulls and Tombstones Band v7.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Sacrasang3d