Cool S Vase - 2 Layer V2.stl

Cool S Vase - 2 Layer V1.stl

Cthulhu Sign.stl

Simple sign, first color is only 1mm thick, second color is same.

Not much more to say about it! Enjoy :)

Squat Rack Safety and J Hook TPU Caps

Safety Bar Knee Saver.stl

E5 Panel Insert.stl

Replica of the extrusion inserts that came with the Creality Ender-5 S1 Pro acrylic panel kit.

I lost some and figured there's a chance others may suffer the same fate. 

I recommend printing in orientation pictured (and should be model's default). Small amount of support required for the underside of the prong (see picture). Only minor bridging required without.

Print pictured was printed with a 0.4mm nozzle, probably would be fine with 0.6mm too.

If you have also lost the square nut a normal M5 hex nut should fit too. That's what I used.

Spool Holder and Desiccant Box

Spool Holder.stl

Oven Hexaknob

Oven Knob.stl

Cute Halloween TPU Wristbands

Jack-O-Band TPU Wristband.stl

Cool S Saber

Cool S Saber v14.stl

Cool S.stl

At some point every kid in school started drawing these “Cool S” logos on everything they could find. It seems this is almost a worldwide phenomenon. Also known as the Stussy S, Super S, Superman S, Universal S, Pointy S, Middle School S, Graffiti S, etc.

I don't know why I modeled this, for some reason I thought about it, then thought about how to model it and then tried to model it. Then 8 had to print it. I wasn't designing to any goal or specification. 

The original size should be 125mm tall but I do not expect issues with resizing to be smaller or larger within reason. The overhangs are at 45 degrees, something most printers should be able to print without support. This model can also potentially be printed in vase mode (spiralized outer for the Cura folks). Whatever floats your benchy.

https://en.wikipedia.org/wiki/Cool_S

No specific printing recommendations other than not needing supports with a well calibrated machine. 

Elbow Saver v2.stl

Simple piece to stick on some metal rods I use to hang some equipment in my garage. But the rods are at upper arm height and beside a tight walkway. So to save myself some pain I printed these in TPU with low infill % and no more than 3 perimeters and stick them on the ends of the rods and my arms are safer.

Mug Holder Insert v2.5.stl

Insert for my couch cup holders to make it possible to have a coffee mug/tea cup in the spot. Also useful for my kid's small cups that disappear in to the cup holder.

Grow Light Bracket 2.0 v7.stl

I have some telescoping grow lights which stand on a tripod base I use to grow plants on a small bookshelf. Unfortunately the light height is still limited so I designed these brackets to mount the lights on the top of the bookshelf and gain additional height.

Sacrasang3d

Achievements

Seedling

Debutant

Trailblazer