Oddity3d

Sky Watcher Pillar Mount Tray - 1.25 inch eye pieces

by
Oddity3d
Follow
Follow
Remix Model
Oddity3d
Oddity3d
|
Image 2 of 2
Sky Watcher Pillar Mount Tray - 1.25 inch eye pieces 3d model
Oddity3d
Oddity3d
|
Image 2 of 2
Sky Watcher Pillar Mount Tray - 1.25 inch eye pieces 3d model
2D
3D
Makes
Sky Watcher Pillar Mount Tray - 1.25 inch eye pieces 3d model
Sky Watcher Pillar Mount Tray - 1.25 inch eye pieces 3d model
This model is restricted by licensing terms. 

Two versions Plossl - slightly smaller/quicker print for if all you use is smaller diameter plossls.

Larger - if you use bigger eye pieces, this one is 10mm larger in diameter

holes are designed for whitworth screws (camera mount/tube ring screws) or m5s will be fine

I made it in ABS, not sure I'd trust I'd trust PLA with eye pieces in case it gets knocked!

Also **the eye piece holes were designed assuming abs 1% shrinkage **


5 Likes7 DownloadsJanuary 2, 2024



5 Likes7 DownloadsJanuary 2, 2024
This model is restricted by licensing terms.