The project files are organized into folders for easier printing and navigation. For that reason, stl file preview is turned off.
This is a custom 3d printable 1:1 scale model inspired by the Daredevil billy club.
The files are made with extra care to attention and 3d printability in mind, so its a fairly simple print and assembly.
It has a twist lock mechanism on each side that allows you to go from 2 separate clubs option to staff option to "nunchaku" option.
I have test printed and adjusted the print tolerances, so it should be a bit tighter fit at the end with is ok because we need it to hold tight. I'm also quite surprised at how well it all works :)
Now for those of us who have smaller printers like the prusa i3mk3s the main parts are split into 2 with a twist lock mechanism.
The opening for the wire is 5mm, so you can use anything up to 5 mm.
There is also a wire attached aid thing in case you wish to use more narrow wire , just attach it to the "aid" and insert.
Rubber Bands used are the regular rubber bands found in any store :)
The cap on the other side is an extra in case you need to replace your main one.
Join our community and find out more at: https://www.facebook.com/groups/3282336185171090
or follow me on instagram: https://www.instagram.com/mysterymakers_3d/
If you like this model please consider joining my patreon. Lots of models each month and many rewards