The project files are organized into folders for easier printing and navigation. For that reason, stl file preview is turned off.

This is a custom 3d printable 1:1 scale model inspired by the Daredevil billy club.

The files are made with extra care to attention and 3d printability in mind, so its a fairly simple print and assembly.

It has a twist lock mechanism on each side that allows you to go from 2 separate clubs option to staff option to "nunchaku" option.

I have test printed and adjusted the print tolerances, so it should be a bit tighter fit at the end with is ok because we need it to hold tight. I'm also quite surprised at how well it all works :)

Now for those of us who have smaller printers like the prusa i3mk3s the main parts are split into 2 with a twist lock mechanism.

The opening for the wire is 5mm, so you can use anything up to 5 mm.

There is also a wire attached aid thing in case you wish to use more narrow wire , just attach it to the "aid" and insert.

Rubber Bands used are the regular rubber bands found in any store :)

The cap on the other side is an extra in case you need to replace your main one.

Join our community and find out more at: https://www.facebook.com/groups/3282336185171090

or follow me on instagram: https://www.instagram.com/mysterymakers_3d/

If you like this model please consider joining my patreon. Lots of models each month and many rewards

https://www.patreon.com/mysterymakers