tracking pixel
Mimetics 3

Heartbreaker, Baby Love Dragon - Articulated Dragon Snap-Flex Fidget (Loose Joints)

by
Mimetics3D
Follow
Follow
Remix Model
Mimetics3D
Mimetics3D
Image 1 of 8
Heartbreaker, Baby Love Dragon - Articulated Dragon Snap-Flex Fidget (Loose Joints) 3d model
2D
3D
Makes
Heartbreaker, Baby Love Dragon - Articulated Dragon Snap-Flex Fidget (Loose Joints) 3d model
Heartbreaker, Baby Love Dragon - Articulated Dragon Snap-Flex Fidget (Loose Joints) 3d model
Heartbreaker, Baby Love Dragon - Articulated Dragon Snap-Flex Fidget (Loose Joints) 3d model
Heartbreaker, Baby Love Dragon - Articulated Dragon Snap-Flex Fidget (Loose Joints) 3d model
Heartbreaker, Baby Love Dragon - Articulated Dragon Snap-Flex Fidget (Loose Joints) 3d model
Heartbreaker, Baby Love Dragon - Articulated Dragon Snap-Flex Fidget (Loose Joints) 3d model
Heartbreaker, Baby Love Dragon - Articulated Dragon Snap-Flex Fidget (Loose Joints) 3d model
Heartbreaker, Baby Love Dragon - Articulated Dragon Snap-Flex Fidget (Loose Joints) 3d model
This model is restricted by licensing terms. 
134 Likes425 DownloadsFebruary 3, 2024
This model is restricted by licensing terms. 


Print-In-Place, No Supports, Articulating Fidget Toy Subscribe To the Mimetics 3D Commercial Tier on Thangs. for rights to sell prints of your cool new friend.

❤️😈❤️😈❤️ A rebel's heart, a roguish smile, Heartbreaker's charm will drive you wild. With every step and every glance, He makes you want to take a chance. ❤️😈❤️😈❤️

This little Love Dragon is here to bring a bit more love into your heart this Valentine's Day.

Find Heartbreaker's counterpart Val here: https://than.gs/m/996335

Heartbreaker, Baby Love Dragon is the 18th creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.

Snap-Flex Collection: This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the model to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience.

Each SNAP will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snap-Flex Instructions: To Lock: Push Body Segments together To Unlock: Pull Body Segments Apart

Tolerance: To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels of this model to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the Loose tolerance model. For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Heartbreaker: https://than.gs/m/1001892 Medium Tolerance Heartbreaker: https://than.gs/m/1001895 Loose Tolerance Heartbreaker: https://than.gs/m/1001896

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

This mini little monster is excited to bring a bit more love into your life

Other Models: For another articulated Valentine's friend, check out this little Heart Axolotl:

Tight Tolerance Alotl Love: https://than.gs/m/994472 Medium Tolerance Alotl Love: https://than.gs/m/994480 Loose Tolerance Alotl Love: https://than.gs/m/994484

Print Settings: 0.2mm Layer Height 3 Wall Loops 3 Top Shell Layers Good Bed Adhesion Required - Consider using glue stick or a brim

Suggested Material: PLA or PLA+ Note: Silk PLA is too weak to hold up to repeated use of the Snap-Flex joint. Use silks at your own risk

No Supports, Print-In-Place at 100% scale Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND harder to pop, so be sure to do a shorter test print to make sure it's not TOO hard to snap into place.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


134 Likes425 DownloadsFebruary 3, 2024




This model is restricted by licensing terms. 
134 Likes425 DownloadsFebruary 3, 2024
This model is restricted by licensing terms.