Here you can find my Christmas Rope Bauble Ornament Collection.

There are different Designs:

Two ropes - single color

Two ropes - dual color

Four ropes - single color

Four ropes - only the ropes without sphere inside (if your printer is able to print it without the sphere inside)

Four ropes - dual color

Ten ropes - single color

Ten ropes - only the ropes without sphere inside (if your printer is able to print it without the sphere inside)

Ten ropes - dual color

Ive printed the Two ropes - single color version with 3 perimeter, 0.2mm layer height and 20% lightning infill.

I used tree supports at angle higher then 60 degree.

You will need some supports because of the rope geometry which creates a lot of overhangs.

I have only a single color printer, so hopefully someone with a multi color will share a make of the dual color versions.

The filament is Prusament PLA Blend Viva La Bronze and i printed it on my CR10-V2 with 215 degree at the nozzle and 50 degree bed temperature.

Would be happy to see your makes!