tracking pixel
Maker M

Old fashioned door lock and key

by

Maker Mike

Follow
Follow
Remix Model
Like
Maker Mike
Maker Mike
Image 1 of 6
Old fashioned door lock and key 3d model
2D
3D
Makes
Old fashioned door lock and key 3d model
Old fashioned door lock and key 3d model
Old fashioned door lock and key 3d model
Old fashioned door lock and key 3d model
Old fashioned door lock and key 3d model
Old fashioned door lock and key 3d model
13 Likes13 DownloadsOctober 25, 2022


An old fashioned chunky lock and key with working bolt and lever mechanism. Created a lock for the cubby house door. I wanted a nice big old fashioned key and it went from there.

The lock has a working mechanism so once the bolt has moved across it is locked in position until you turn the key again.

Unlike the old iron locks, its really easy to turn the key. I'd almost say a pleasure to use!

Very short video showing it working… https://youtu.be/11DwejvkdYs

I printed in PETG for a bit of strength.

Screws used:

  • 4 small screws to attach the lid 4g x 12mm
  • 4 long screws to attach to the door 6g x39mm (you could use longer)

Supports only required for the key. Print the key with a Brim so it has good bed adhesion and then trim off the Brim and supports after printing. I also gave it a light sand.


13 Likes13 DownloadsOctober 25, 2022




13 Likes13 DownloadsOctober 25, 2022