Straighten out your workshop with Gridfinity modular storage - deploy these plates anywhere you need some order!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at 
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source files: 
- Frame: https://a360.co/3ccHbsg
- Weighted Plate: https://a360.co/3uCJ2gR

The foundation of every Gridfinity setup is a baseplate, and these let you drop storage where you need it most.

**Frame**: The absolutely minimal no-frills baseplate. No room for screws or magnets, but saves filament and headroom. If your storage unit is on a steel surface, you can still put magnets in the storage blocks to keep them from sliding.

**Weighted**: Heavy, sturdy baseplate perfect for desktops, shelves, and other places where knocking stuff over is a big problem. 

Secure blocks permanently with [M3 screws,](https://amzn.to/37IaXTg) or temporarily with [6x2mm magnets](https://amzn.to/37Ihopq). Add [rubber feet](https://amzn.to/3LZv4v5) to keep the whole shebang from sliding, and [metal tire weights ](https://amzn.to/3uAzH9f)to drop the center of gravity and prevent wipeouts. You don't need to install every magnet, foot, and weight! Just use enough for your needs.

A Prusa i3 Mk3 can print up to a 5x5 grid. No matter what you use, make sure your bed adhesion and release is dialed in - these love to curl, and their high surface area can make them challenging to remove.

**Gridfinity Tips!**
- No brims or support required! 
- Use any filament with an 0.6mm or smaller nozzle. 
- Wider plates can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

Gridfinity Baseplates

Weighted Baseplate 3x2.stl

Frame 1x4.stl

Frame 1x5.stl

Frame 1x6.stl

Frame 1x7.stl

Frame 2x2.stl

Frame 2x3.stl

Frame 1x2.stl

Frame 1x3.stl

Frame 2x7.stl

Frame 3x3.stl

Frame 3x4.stl

Frame 3x5.stl

Frame 3x6.stl

Frame 3x7.stl

Frame 4x4.stl

Frame 4x5.stl

Frame 4x6.stl

Frame 4x7.stl

Frame 5x5.stl

Frame 5x6.stl

Frame 5x7.stl

Frame 6x6.stl

Frame 6x7.stl

Frame 2x5.stl

Frame 2x6.stl

Weighted Baseplate 1x3.stl

Weighted Baseplate 1x4.stl

Weighted Baseplate 1x5.stl

Weighted Baseplate 1x6.stl

Weighted Baseplate 1x7.stl

Weighted Baseplate 2x2.stl

Weighted Baseplate 1x1 (super cute).stl

Weighted Baseplate 1x2.stl

Weighted Baseplate 2x4.stl

Weighted Baseplate 2x5.stl

Weighted Baseplate 3x6.stl

Weighted Baseplate 3x7.stl

Weighted Baseplate 4x4.stl

Weighted Baseplate 4x5.stl

Weighted Baseplate 4x6.stl

Weighted Baseplate 4x7.stl

Weighted Baseplate 5x5.stl

Weighted Baseplate 5x6.stl

Weighted Baseplate 5x7.stl

Weighted Baseplate 6x6.stl

Weighted Baseplate 6x7.stl

Weighted Baseplate 7x7.stl

Weighted Baseplate 2x7.stl

Weighted Baseplate 3x3.stl

Weighted Baseplate 3x4.stl

Weighted Baseplate 3x5.stl

Safely grab the right tool with the Gridfinity modular workshop storage system!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at https://www.youtube.com/watch?v=ra_9zU-mnl8
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source files: 
- Nipper Holder: https://a360.co/37jchw3
- Stripper Holder: https://a360.co/3Erq2oV

These racks pack tons of hand tools into a small area, positioned so you can safely see and grab the business ends. These work great for nippers, flush cutters, wire strippers, pliers, scissors, crimpers, nibblers, cutters, and punch-down tools.

*These storage blocks are extra-big and tend to curl! Use a brim and ensure good bed adhesion.* 

**Nipper Holder**: Holds six tools about 80mm from handle to handle. If the tool is spring-loaded, the undercut will keep it from falling out. This can be mounted sideways to store five tools.

**Stripper Holder**: Holds two wire strippers or other long, slim hand tools up to 18mm thicc. I've prepared two sizes - 200mm is your usual multi-hole wire stripper, and 160mm fits many crimpers and termination tools. Both should fit on most printers.

**Gridfinity Tips!**
- Use any filament with an 0.6mm or smaller nozzle. 
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

Gridfinity Nippers + Strippers + Pliers Racks

Nipper Holder x6.stl

A space for your allen wrenches in the gridfinity setup. 2 blocks. Thanks, Zack!

Allen Wrench set gridfinity Allan

Gridfinity bulk storage of drills from 1.5mm to 10mm in 0.5mm intervals. good for compact storage of all your spare drill bits.

Gridfinity Drill Caddy

Gridfinity 1.5 - 10mm Drill Caddy

I was about to print https://thangs.com/designer/espinozaerik/3d-model/Allen%20Wrench%20set%20gridfinity%20Allan-63186 when I noticed it had a few issues.  I aligned it better, put it on a base that prints better, and doubled the hex wrench storage in the same space with less filament.

Allen Wrench gridfinity v2

Creality includes a set of Allen Wrenchs with every 3D Printer. A 4mm, 3mm, 2.5mm, 2mm and 1.5mm allen wrench.

This is a holder for the Allen Wrenchs and It slides into the top aluminum extrusion.

I used some of the T-Handles by garygrano https://www.thingiverse.com/thing:4912677
I included garygrano .stl files for the 4, 3, 2.5, 2 and 1.5 as well in the download.


Allen Wrench Holder

I created a longer handle for "TheGoofy's" Yet ANOTHER Machine Vise (https://www.thingiverse.com/thing:2064269).
I also have a .3mf file that includes my Extra Fast Cura Profile at a new 0.20 layer height to give you better prints at a fast speed.

Just load the .3mf as a project in Cura version 5.0 to get the profile.

If you just want the .stl you can download that instead.

Yet ANOTHER Machine Vise - longer handle

LongerViseHandle.stl

no need for supports print as is , it depends on the print may need to clean the holes
You can see how i made it here https://youtu.be/A0WuDzjQYgc

Drill Bit Holder

Two rows of drills, indent for 12mm labels.

Mix your own version for any number of bits and sizes using the OpenScad files.

#gridfinitry 

Sources here: https://github.com/andrejpk/gridfinity_openscad

Gridfinity Drill Holders (parametric)

Metric Drill Holder

This is my take on Zack's Cthulhu-sized dremel bit storage model. For those that can't find it, Zacks model got taken down (I think he had to get dat $ from thangs) so Rogarat added the original model to their remix files here https://www.thingiverse.com/thing:4623056/files. I will include it here as well. Tesser-Wolf has a smaller (more sane) remix of Zack's model here https://www.thingiverse.com/thing:5269037. I remixed the latter to fit into the gridfinity system as well as to mount a stand for my flex shaft motor, and a spot for a chuck key. I'll likely add a gridfinity remix of Zack's original model in the future, but for now, this model hold about 1/2 and will likely suit the average dremel wielding debonair. 

It's printing now, Ill post photos when it's finished.

I'd love to see photos of your finished prints as well as to get feedback on your experience with it. Hope you enjoy!

Edit:
It finished and it works great! I added some photos. Thanks for the downloads and I hope you all enjoy the part!


#dremel #gridfinity #rotarytool

#Gridfinity Workbench Dremel Bit storage Remix

This is my take on Zack's Cthulhu-sized dremel bit storage model. For those that can't find it, Zacks model got taken down (I think he had to get dat $ from thangs) so Rogarat added the original model to their remix files here https://www.thingiverse.com/thing:4623056/files. I will include it here as well. Tesser-Wolf has a smaller (more sane) remix of Zack's model here https://www.thingiverse.com/thing:5269037. I remixed the latter to fit into the gridfinity system as well as to mount a stand for my flex shaft motor, and a spot for a chuck key. I'll likely add a gridfinity remix of Zack's original model in the future, but for now, this model hold about 3/4 and will likely suit the average dremel wielding debonair. 

It's printing now, Ill post photos when it's finished.

Gridfinity Workbench Dremel Bit storage Remix

Workbench_storage_Dremel_Bit_Storage_V2original (2).stl

Working Padlock

Files for 3D-printing

STEP file included

Check out my other models at:
https://thangs.com/mattias.hellberg.95

Working Padlock

Padlock.STEP

A Gridfinity holder for Dremel bits. Includes lots of holes, plus spaces for up to three of the tiny spanners.

Gridfinity dremel bit storage.stl

GF dremel bit storage.stl

This is a gridfinity compatible 3x1x2 container for a hex socket set (originally a Makita set) it holds up to 16 sockets from 5mm to 13mm 

I've designed it for my set which has the following sockets...
 5mmx2, 5.5mm, 6mmx2, 7mmx2, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm

this leaves 3 spaces at 5.5mm, 8mm and 9mm for other sockets.

Gridfinity is based on a design by **Zack Freedman **which he made open source - **_Zack you are Awesome!_**

Please subscribe to my youtube channel [https://www.youtube.com/c/diytinkerer](https://www.youtube.com/c/diytinkerer) :-) thanks!


Gridfinity 3x1x2 Hex Socket Set.stl

Print two of these (one of them mirrored) and it should hold the majority of wrenches out there.  Fit two sets of wrenches I own  easily.

FreeCAD model included.

Gridfinity 1x3 Universal Wrench Holder

Print two of these (one of them mirrored) and it should hold the majority of wrenches out there.  Fit two of mine easily.

FreeCAD model included.

Gridfinity 3x1 Universal Wrench Holder

Gridfinity 13pc Drill Caddy

60mm power tool hangers

Here is my entry for the #ThangsWorkspace challenge. 
**I've remixed the Sliding Dovetail Lid Box by [@productdesignonline](https://social.thangs.com/u/5353) and have remixed it into a Sliding Dovetail Lockbox with a spring lock mechanism that can only be operated by a key.**
_As the theme was outdoors, I decided to convert the original model into something that can be safely carried outdoors without accidently opening as well as ensuring that only the proper key can open the spring lock._

All .stl files have been added and can be printed individually.

**Link to the Original Sliding Dovetail Lid Box by Kevin Kennedy ([@productdesignonline](https://social.thangs.com/u/5353)):
https://social.thangs.com/m/6957**

Sliding Dovetail Lock Box with Key

Sliding Dovetail Lid Box by Product Design Online. (Base file for remixing)

Sliding Dovetail Lid Box.stl

SDLB Spring Lock.STL

SDLB Body.STL

SDLB Key.STL

SDLB Lid.STL

gridifinty compatible sorter for standard dremel bits, holds them at a 30 degree angle.

gridfinity dremel bit 3x2

gridifinty compatible sort for standard dremel bits

13 slot jig saw blade caddy to fit the Gridfinity system from Zack. 
securely holds 13 individual blades with an inbuild locking profile and is stackable. 

i am trying to make a collection of custom generic workshop caddies that conform to the Gridfinity system. more models will be added slowly.

Gridfinity Jig Saw Blade Caddy

Jig Saw Blade Caddy

A drill caddy for small metric drill bits, it holds 27+ drill bits from 1mm to 13mm 
**Full list of drill bits... **
1mm - 4.5mm in 0.5mm increments (2 each) 5mm - 7mm in 0.5mm increments (1 each) 8mm - 13mm in 1mm increments (1 each) 

+ 10mm hole for misc. bit(s) (e.g. a counter-sink bit) 
+ 100m long tray for misc bits

The holes are square and 0.5mm larger than the intended bits -_ this allows you a little latitude to fit in odd sizes _
[D.I.Y. TINKERER](https://www.youtube.com/c/diytinkerer ) 

**concept: Zack Freedman**


Gridfinity 3x1x4 Drill Bit Caddy.stl

Gridfinity 3x1x2 Drill Bit Caddy.stl

A Gridfinity Holder for Pliers with 3 slots in 5x2 configuration

Gridfinity Pliers Holder 3 in 5x2

This holds my 7 wrench set from craftsman. I printed two of these for my metric/UAE wrenches. the largest metric it holds is 18mm. the height of the holder is 42mm as I've got a shallow drawer these are in. 

Gridfinity Craftsman Wrench Holder 2x2.stl

Gridfinity_Craftsman_Wrench_Holder_2x2.stl

Includes Both standard and deep base for tools with a belt clip. easily store your Milwaukee power tools under a shelf or on the wall. 
Uses 6mm or 1/4 inch countersunk screws.
Optimised to print in a standing orientation no supports required.


Milwaukee M18 Tool holder

Milwaukee M18 STD Base Tool holder.stl

no special settings needed , easy to print easy to install.
You can see how i made it here https://youtu.be/bhyZyJtE-VI

Home Improvement

Most Popular of All Time

Categories

Popular

Personalize

Trending