tracking pixel
Profile Image
Mack Stuff
Mack Stuff

Mack Stuff

Just making stuff.

I now have a membership set up, consider joining as a way to donate to me if you'd like to! Or you can check out my BuyMeACoffee. Thanks!

Printables: https://www.printables.com/@MackStuff_1750232 MakerWorld: https://makerworld.com/en/@MackStuff BuyMeACoffee https://buymeacoffee.com/mackstuff

Follow

Select a membership plan

$10.00
/ month

Please consider donating to me if you like my work!

With this plan, you receive commercial permission for any model that is not already licensed for commercial use for the duration of your subscription. I appreciate any support!

Mackenzie B

Stackable Flower Pot Trellis

by
Mack Stuff
Follow
Follow
Remix Model
Mack Stuff
Mack Stuff
|
Image 1 of 4
Stackable Flower Pot Trellis 3d model
Mack Stuff
Mack Stuff
|
Image 1 of 4
Stackable Flower Pot Trellis 3d model
2D
3D
Makes
Stackable Flower Pot Trellis 3d model
Stackable Flower Pot Trellis 3d model
Stackable Flower Pot Trellis 3d model
Stackable Flower Pot Trellis 3d model
This model is restricted by licensing terms. 

Plant trellis that can be easily printed in multiple and stacked for increased height.

Requires supports on the “spike” parts at the bottom of the model, but otherwise not too complicated to print. If you print multiple then you can slide them together easily to get extra height.

Total model dimensions are 205mm from the end of the spike to the top of the trellis, and 200mm wide at the top segment, so this should fit on any standard-sized printer bed. The spike portions are 60mm long, so each trellis in the stack gives 145mm of height.

This work is licensed under Creative Commons Attribution 4.0 International. To view a copy of this license, visit https://creativecommons.org/licenses/by/4.0/


18 Likes33 DownloadsJune 24, 2024


18 Likes33 DownloadsJune 24, 2024
This model is restricted by licensing terms.