Kawaii Stitch with Boba Hueforge

******* Please Follow Below Instructions Carefully to have a successful print. Color variations are based upon your choices of colors. *******

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA Protopasta Cobalt Blue Transmission Distance: 5 PLA Sunlu Green Transmission Distance: 6

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Cobalt Blue At layer #12 (1.04mm) swap to Green for the rest.