This is our Fire Dragon Hueforge. It is meant to be a beautiful piece of work you can hang on your wall or put on your desk, or anywhere your heart desires. It is an easy print and it is extremely detailed and just astonishing.
This file is a hueforge intended for mmu machines, but it can be printed by a standard printer. You just have to be able to manually change the filament at the set heights required below.
Purchase of this file gives you personal rights to the file meaning you can print it. If you would like commercial rights to sell the prints, please subscribe to our memberships.
The print settings for this file are as follows:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 5
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions: Start with Black At layer #5 (0.48mm) swap to White At layer #11 (0.96mm) swap to Red for the rest.