Joey G

GEN2-QL Drawer Slim - Single - MEDIUM.stl

by
Jerrari
Follow
Follow
Remix Model
Jerrari
Jerrari
|
Image 1 of 4
GEN2-QL Drawer Slim - Single - MEDIUM.stl 3d model
Jerrari
Jerrari
|
Image 1 of 4
GEN2-QL Drawer Slim - Single - MEDIUM.stl 3d model
2D
3D
Makes
GEN2-QL Drawer Slim - Single - MEDIUM.stl 3d model
GEN2-QL Drawer Slim - Single - MEDIUM.stl 3d model
GEN2-QL Drawer Slim - Single - MEDIUM.stl 3d model
GEN2-QL Drawer Slim - Single - MEDIUM.stl 3d model
This model is restricted by licensing terms. 

| Visit JERRARI.com for Instructions and a complete look at the GEN2 collection


The GEN2 Decor Series is the next evolution in the most versatile 3D printed drawer system, The GEN2 Modular Storage System. You can now easily swap faceplate and handles to fit the mood of the room you want. Being able to easily customize colors, patterns, or adding custom text.

This GEN2 Decor Drawers - MEDIUM is a collection of the medium length drawer bodies that can be printed on even small printers. The bodies can be printed in any material, slap any sleek GEN2 Decor faceplate and handle/knob to the front, and BAM! You got yourself something that will look at home in any room.


What you need? These drawers are completely compatible and interchangeable with any GEN2 drawer systems in MEDIUM length. Here are my recommended links to get started:

DRAWER CASES: GEN2 Modular Drawers - MEDIUM & GEN2 Slim Drawers - MEDIUM Here you will find everything you need for installing the drawers under tables, such as the rails, drawers cases, and my favorite… QuickLocks!

TABLE-TOP KIT: GEN2 Table Top Kit - MEDIUM - Alternatively this kit will allow you to place your drawers on top of any table surface.

FACEPLATES & HANDLES: GEN2 Decor Series Collection


INSTRUCTIONS • Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.

• As noted above you'll also need a GEN2 system of your choice, don't worry, they are fully modular and can be changed around at any time.


9 Likes17 DownloadsOctober 18, 2024



9 Likes17 DownloadsOctober 18, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.2mm

MaterialPETG
Layer height0.2 mm
Infill density10 %
SupportsNone
BrimNo