tracking pixel
Joey G

GEN2 Decor Drawers - STANDARD

by
Jerrari
Follow
Follow
Remix Model
Jerrari
Jerrari
|
Image 3 of 9
GEN2 Decor Drawers - STANDARD 3d model
Jerrari
Jerrari
|
Image 3 of 9
GEN2 Decor Drawers - STANDARD 3d model
2D
3D
Makes
GEN2 Decor Drawers - STANDARD 3d model
GEN2 Decor Drawers - STANDARD 3d model
GEN2 Decor Drawers - STANDARD 3d model
GEN2 Decor Drawers - STANDARD 3d model
GEN2 Decor Drawers - STANDARD 3d model
GEN2 Decor Drawers - STANDARD 3d model
GEN2 Decor Drawers - STANDARD 3d model
GEN2 Decor Drawers - STANDARD 3d model
GEN2 Decor Drawers - STANDARD 3d model
This model is restricted by licensing terms. 

| Visit JERRARI.com for a complete look at the GEN2 collection

For Instructions Download the:

GEN2 Interactive Catalog Download


The GEN2 Decor Series is the next evolution in the most versatile 3D printed drawer system, The GEN2 Modular Storage System. You can now easily swap faceplate and handles to fit the mood of the room you want. Being able to easily customize colors, patterns, or adding custom text.

This GEN2 Decor Drawers - STANDARD is a collection of the standard length drawer bodies. The bodies can be printed in any material, slap any sleek GEN2 Decor faceplate and handle/knob to the front, and BAM! You got yourself something that will look at home in any room.


What you need? These drawers are completely compatible and interchangeable with any GEN2 drawer systems in STANDARD length. Here are my recommended links to get started:

GEN2 Modular Drawers - STANDARD - Here you will find everything you need for installing the drawers under tables, such as the rails, drawers cases, and my favorite… QuickLocks!

GEN2 Table Top Kit - STANDARD - This kit contains covers and feet to place the drawers on any surface.

FACEPLATES • Essential Series - DOWNLOAD • Chevron Series - DOWNLOAD • EdgeMetal Series - DOWNLOAD

HANDLE/KNOBS • BlockBar Series - DOWNLOAD • Crystal Series - DOWNLOAD


HARDWARE Includes affiliated links to help support my projects • Filament - Black PETG (My go to for the drawer bodies) • Screwdriver • Countersunk woodscrews: (Metric: 4x25mm to 4x16mm) or (SAE: #6 or #8 up to 1" long) • Drill bit that is smaller diameter than the wood screws • Pen, Marker, or Scratch Awl (for installing under tables) • Magnets (Optional): 10x5x2mm or 10x2mm • M3 nuts and screws: M3x6 - M3x10- I prefer this kit For basic instruction on assembly please check out the above video

INSTRUCTIONS • Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.

• As noted above you'll also need a GEN2 system of your choice, don't worry, they are fully modular and can be changed around at any time. You'll at least need the drawer case from this model kit to get started - GEN2 Modular Drawers - Standard.


39 Likes126 DownloadsAugust 10, 2024



39 Likes126 DownloadsAugust 10, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.2mm

Layer height0.2 mm
Infill density10 %
SupportsNone