| Visit JERRARI.com for Instructions and a complete look at the GEN2 collection
The EdgeMetal Series is a collection of drawer faceplates for the GEN2 Decor Series. Simply print the drawer bodies from one of the Base Drawer Models, and slide your personalized faceplate in place. Lock in place by mounting a printable handle with a M3 screw and nut.
The EdgeMetal series has a strong sharp look unlike anything else. Printed in a highly reflective filament, the angled corners generate an striking appearance. Print as one solid color or experiment with multicolor printing for some really fascinating results.
What You'll Need
BASE DRAWER MODELS • GEN2 Decor Drawers - Standard - DOWNLOAD
HANDLE/KNOBS • BlockBar Series - DOWNLOAD • Crystal Series - DOWNLOAD
HARDWARE Includes affiliated links to help support my projects • Filament - Silk Silver PLA (this is what I used in many of my photos) • M3 nuts and screws: M3x6 - M3x10- I prefer this kit
INSTRUCTIONS • Print the model laying face up, no supports needed • Push M3 nuts into slots on handles/knobs
• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.