This is an alternate spool mount for the Peopoly Magneto X 3d printer. 

I did not like the stock mount that came with the printer. I thought it was too flimsy and I had some spools fall off while printing. So, I designed this sturdy spool mount

This mount uses the existing threaded holes on the left hand side rail. 
I used M4x12 and M3x16 screws to attach this to the printer. 

You may want to add some very light grease or dry lube to the sleeves that go over the rollers. Then attach the roller end caps with glue. 


Spool Mount for the Peopoly Magneto X

Spool-Mount-MagnetoX-Full.stl

This set is a full mounting system for the 3D Chameleon. 
This is for the Peopoly Magneto X 3D printer. 

The mount can go either on the left or right hand top rail of the machine. 

NOTE: This kit is only meant for Magneto X printers that are not enclosed.

== This design is a remix of William Steele's original mount found here: https://www.printables.com/model/826410-magneto-x-3dchameleon-mounts-and-orcaslicer-profil ==

3D Chameleon Mount for Peopoly Magneto X - No Enclosure

3D-Chameleon-Mount-Magneto-X.stp

A variety of shapes and styles to use as item bases for your photos. 
You can use them as containers if you want. 

Item bases for photography

Photo-Props.stp

This phone stand is sorta shaped like an audio wave. Simple to print and sturdy. 

Audio Wave - Phone Stand

Phone-Stand-V3.stl

UPDATE 3/20/2023: 

I've updated the design a bit so that it fits better inside the vacuum.
It now resembles the original part a bit more. 

V2 Changes: 
- The underside now has a hollow cone shape.
- The part is shorter so it fits better
- Zero supports needed
- The center hole is slightly smaller so it fits the shaft tighter. 
- The part is now 4-5 grams lighter. 
- New photos to the post so you can see how it's installed. 

Description: 
My Dyson DC23 canister vacuum stopped spinning the brush heads. I took it apart and found that the impeller was broken and could not longer hold itself to the metal shaft in the head. 

I did not want to buy a $100 part or a new vacuum so I designed this replacement impeller for my Dyson vacuum. 

I've had it installed for about 8 months prior to this post and have had no issues or problems with it. 

---
This part is verified working the the following part: 

Turbine head
Part no. 906565-32
https://www.dyson.com/support/journey/spare-details.906565-32.19076-01
 

It might work with other models but I don't know which ones. If you do know, please leave a comment. 

Thanks. 


- PRINTING - 
Max infill of 30% otherwise it will be too heavy
PETG or better. (PLA might work)


My print settings (0.6mm Nozzle): 
Material: PCTG
Nozzle: 0.6mm CHT
Layer Height: 0.2mm
Walls: 2
Infill: 25% Gyroid
Temperature: 260C

Dyson DC23 Impeller V2

Dyson-DC23-Impeller-V2

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Jazz Cabbage

Achievements

Seedling

Explorer

Spool Mount for the Peopoly Magneto X

3D Chameleon Mount for Peopoly Magneto X - No Enclosure

Item bases for photography

Audio Wave - Phone Stand

Dyson DC23 Impeller V2