6 Colour ‘filament painting’ model, Skull And Roses
(I recommend the following max speed settings, inner walls, outer walls and gap infill - 200mm/s, sparse infill, internal solid infill and top surface - 150mm/s)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used: PLA Sunlu PLA+ Black Transmission Distance: 0.6 PLA Esun PLA+ Dark Blue Transmission Distance: 2.5 PLA Sunlu PLA+ Blue Transmission Distance: 3.5 PLA Sunlu PLA+ Grass Green Transmission Distance: 2.5 PLA Esun PLA+ Bone White Transmission Distance: 4 PLA Sunlu PLA+ White Transmission Distance: 6
Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Dark Blue At layer #6 (0.56mm) swap to Blue At layer #7 (0.64mm) swap to Grass Green At layer #8 (0.72mm) swap to Bone White At layer #14 (1.2mm) swap to White for the rest.
I would recommend trying to match the td as close as possible if not using the exact filaments to get the best results
Use the exact numbers in your slicer to match up properly.
The Model is designed to print with 0.4 nozzle.
If re-scaling model make sure not to alter the Z height of the model
ALL of Ian Smalley's designs are protected by Copyright Law. Downloading does not give you permission to use the files or physical prints for financial gain. If you want a commercial license to Legally sell prints from my designs, you will need a SELLER subscription.