Note: This is my first attempt at 3D modeling, feedback is appreciated!
This is the game of Toc (aka. Tock, Tok, Tuck, Tac, Ludo, Dog or Pock), with a 18 holes per zone setup and 7th hole gets you to shortcut the board. https://en.wikipedia.org/wiki/Tock
There are 2 plates for this model: the angle one and the regular one. With 4 angle plates, you can make a board for 4 players. Add 2 or 4 regular plates and you can add the corresponding number of players. You can also play with 2 regular plates to make a 2 players games.
You will need 54 cards deck and tokens to play it. You can print or re-use 4 tokens per player (holes have a diameter of 10 mm) to play it. In 4, 6 or 8 players configurations, the model offer magnet holes to seamlessly connect the plates together. Cylindrical magnets of 8mm x 3mm can fit the lateral holes if you want to connect plates. Be careful to have consistent magnet polarity across your plates.
The 2 plates are color ready and print reversed to save filament. If you need to print color by color, colored bodies/objects are independent and could be separated / glued.