tracking pixel
Ivan K

Flexi Baby Elephant with Hats Print In Place/ 3MF Included / No Supports

by
IK3D
Follow
Follow
Remix Model
IK3D
IK3D
|
Image 1 of 7
Flexi Baby Elephant with Hats Print In Place/ 3MF Included / No Supports 3d model
IK3D
IK3D
|
Image 1 of 7
Flexi Baby Elephant with Hats Print In Place/ 3MF Included / No Supports 3d model
2D
3D
Makes
instagram-play
Flexi Baby Elephant with Hats Print In Place/ 3MF Included / No Supports 3d model
Flexi Baby Elephant with Hats Print In Place/ 3MF Included / No Supports 3d model
Flexi Baby Elephant with Hats Print In Place/ 3MF Included / No Supports 3d model
Flexi Baby Elephant with Hats Print In Place/ 3MF Included / No Supports 3d model
Flexi Baby Elephant with Hats Print In Place/ 3MF Included / No Supports 3d model
Flexi Baby Elephant with Hats Print In Place/ 3MF Included / No Supports 3d model
Flexi Baby Elephant with Hats Print In Place/ 3MF Included / No Supports 3d model
This model is restricted by licensing terms. 
31 Likes108 DownloadsMay 21, 2024
This model is restricted by licensing terms. 


Adorable flexi baby elephants with a set of 3 interchangeable hats including: Party hat, Cowboy hat and Mexican hat.

Prints super easy with no supports at all!

Included files: -STL Files for the flexi elephant for single and multicolor printing (The files are easy to paint with the bucket tool). -STL Files for the flexi elephant for single and multicolor printing with a flat top so you can add your own magnets. -STL Files for the hats, so you can add your own magnets or glue them to the elephant. The files can be painted on the slicer too or printed in a single color. -Pre-painted 3MF Factory Files of the flexi elephants for the version with and without magnets. -Pre-painted 3MF Factory Files for all 3 hats.

Instructions:

-If you are planning on adding magnets I have used 5x2mm Neodymium magnets. -When adding the magnets for the hats, the magnet will stick to the bed so it won't move. -When adding a magnet to the elephant head, I recommend gluing the magnet inside the hole first and let it dry for a few seconds, or it could move away.

"All of my models are for personal use only, unless you are an active subscriber with a commercial license."

3D PRINTING SETTINGS:

-No supports needed

-2-3 Walls, 8% rectilinear infill or more, 0.2mm with variable layer height

-All the files can be printed in a single color or multicolor.


31 Likes108 DownloadsMay 21, 2024




This model is restricted by licensing terms. 
31 Likes108 DownloadsMay 21, 2024
This model is restricted by licensing terms.