Flexi Baby Elephant with Hats Print In Place/ 3MF Included / No Supports
byIK3DAdorable flexi baby elephants with a set of 3 interchangeable hats including: Party hat, Cowboy hat and Mexican hat.
Prints super easy with no supports at all!
Included files: -STL Files for the flexi elephant for single and multicolor printing (The files are easy to paint with the bucket tool). -STL Files for the flexi elephant for single and multicolor printing with a flat top so you can add your own magnets. -STL Files for the hats, so you can add your own magnets or glue them to the elephant. The files can be painted on the slicer too or printed in a single color. -Pre-painted 3MF Factory Files of the flexi elephants for the version with and without magnets. -Pre-painted 3MF Factory Files for all 3 hats.
Instructions:
-If you are planning on adding magnets I have used 5x2mm Neodymium magnets. -When adding the magnets for the hats, the magnet will stick to the bed so it won't move. -When adding a magnet to the elephant head, I recommend gluing the magnet inside the hole first and let it dry for a few seconds, or it could move away.
"All of my models are for personal use only, unless you are an active subscriber with a commercial license."
3D PRINTING SETTINGS:
-No supports needed
-2-3 Walls, 8% rectilinear infill or more, 0.2mm with variable layer height
-All the files can be printed in a single color or multicolor.