7 Unique Designs! 

Save by purchasing as a Collection and you'll get access to all current and future designs of my stacking dishes

My modular nesting dishes stack to form any combo of colors and textures you'd like! Perfect for small objects like your keys, chapstick, cleaning cloths, trinkets, jewelry, and more. The inside of the dish is a perfectly-scoopable-with-your-fingies curved slope.

For an elevated finish, add a thin felt, cork or rubber pad to the base inside the nesting groove!

This design features six gentle grooves on the outer surface, a pleasure to grip.

My modular nesting dishes stack to form any combo of colors and textures you'd like! Perfect for small objects like your keys, chapstick, cleaning cloths, trinkets, jewelry, and more. The inside of the dish is a perfectly-scoopable-with-your-fingies curved slope.

For an elevated finish, add a thin felt, cork or rubber pad to the base inside the nesting groove!

**Features**
- modular with other dishes and lids
- printable in any material (I've tested PLA, PETG and TPU)
- hand-sized for easy stacking and unstacking
- small ridge-and-groove nesting system

**Recommended Parameters**
- Arc Fitting = off 
- Wall Loops = 2
- Top Surface Pattern = Concentric
- Top Shell Layers = 6
- Bottom Surface Pattern = Monotonic
- Sparse Infill Density = 15%
- Sparse Infill Pattern = Gyroid

**Supports**
- Enable = True
- Type = normal(auto)
- Style = Snug
- On Build Plate Only = True
- This should produce a single ring of support within the bottom groove that can easily be peeled out after print.

_Please note: This model is for personal use only per the terms of the Harter Designworks Non-Commercial Use License Agreement, attached._

SPIRAL - Stacking Dish

Circular Stacking Dish - Spiral.stl

Two rows of smooth, satisfying bumps give this dish a nice bubbly feel and organic feel.

My modular nesting dishes stack to form any combo of colors and textures you'd like! Perfect for small objects like your keys, chapstick, cleaning cloths, trinkets, jewelry, and more. The inside of the dish is a perfectly-scoopable-with-your-fingies curved slope.

For an elevated finish, add a thin felt, cork or rubber pad to the base inside the nesting groove!

**Features**
- modular with other dishes and lids
- printable in any material (I've tested PLA, PETG and TPU)
- hand-sized for easy stacking and unstacking
- small ridge-and-groove nesting system

**Recommended Parameters**
- Arc Fitting = off 
- Wall Loops = 2
- Top Surface Pattern = Concentric
- Top Shell Layers = 6
- Bottom Surface Pattern = Monotonic
- Sparse Infill Density = 15%
- Sparse Infill Pattern = Gyroid

**Supports**
- Enable = True
- Type = normal(auto)
- Style = Snug
- On Build Plate Only = True
- This should produce a single ring of support within the bottom groove that can easily be peeled out after print.

_Please note: This model is for personal use only per the terms of the Harter Designworks
Non-Commercial Use License Agreement, attached._

BUMP - Stacking Dish

Circular Stacking Dish - Bump.stl

Two rows of gentle dimples are perfect for pinching and picking up this particular dish.

My modular nesting dishes stack to form any combo of colors and textures you'd like! Perfect for small objects like your keys, chapstick, cleaning cloths, trinkets, jewelry, and more. The inside of the dish is a perfectly-scoopable-with-your-fingies curved slope.

For an elevated finish, add a thin felt, cork or rubber pad to the base inside the nesting groove!

**Features**
- modular with other dishes and lids
- printable in any material (I've tested PLA, PETG and TPU)
- hand-sized for easy stacking and unstacking
- small ridge-and-groove nesting system

**Recommended Parameters**
- Arc Fitting = off 
- Wall Loops = 2
- Top Surface Pattern = Concentric
- Top Shell Layers = 6
- Bottom Surface Pattern = Monotonic
- Sparse Infill Density = 15%
- Sparse Infill Pattern = Gyroid

**Supports**
- Enable = True
- Type = normal(auto)
- Style = Snug
- On Build Plate Only = True
- This should produce a single ring of support within the bottom groove that can easily be peeled out after print.

_Please note: This model is for personal use only per the terms of the Harter Designworks
Non-Commercial Use License Agreement, attached._

DIMPLE - Stacking Dish

Circular Stacking Dish - Dimple.stl

Diagonal ribs give this dish wonderful horizontal motion. Print mirrored copies and stack them to achieve a herringbone effect!

My modular nesting dishes stack to form any combo of colors and textures you'd like! Perfect for small objects like your keys, chapstick, cleaning cloths, trinkets, jewelry, and more. The inside of the dish is a perfectly-scoopable-with-your-fingies curved slope.

For an elevated finish, add a thin felt, cork or rubber pad to the base inside the nesting groove!

**Features**
- modular with other dishes and lids
- printable in any material (I've tested PLA, PETG and TPU)
- hand-sized for easy stacking and unstacking
- small ridge-and-groove nesting system

**Recommended Parameters**
- Arc Fitting = off 
- Wall Loops = 2
- Top Surface Pattern = Concentric
- Top Shell Layers = 6
- Bottom Surface Pattern = Monotonic
- Sparse Infill Density = 15%
- Sparse Infill Pattern = Gyroid

**Supports**
- Enable = True
- Type = normal(auto)
- Style = Snug
- On Build Plate Only = True
- This should produce a single ring of support within the bottom groove that can easily be peeled out after print.

_Please note: This model is for personal use only per the terms of the Harter Designworks
Non-Commercial Use License Agreement, attached._

SLANT - Stacking Dish

Circular Stacking Dish - Slant.stl

Vertical ribs give the surface of this dish a wonderfully tactile grip and visually stimulating pattern.

My modular nesting dishes stack to form any combo of colors and textures you'd like! Perfect for small objects like your keys, chapstick, cleaning cloths, trinkets, jewelry, and more. The inside of the dish is a perfectly-scoopable-with-your-fingies curved slope.

For an elevated finish, add a thin felt, cork or rubber pad to the base inside the nesting groove!

**Features**
- modular with other dishes and lids
- printable in any material (I've tested PLA, PETG and TPU)
- hand-sized for easy stacking and unstacking
- small ridge-and-groove nesting system

**Recommended Parameters**
- Arc Fitting = off 
- Wall Loops = 2
- Top Surface Pattern = Concentric
- Top Shell Layers = 6
- Bottom Surface Pattern = Monotonic
- Sparse Infill Density = 15%
- Sparse Infill Pattern = Gyroid

**Supports**
- Enable = True
- Type = normal(auto)
- Style = Snug
- On Build Plate Only = True
- This should produce a single ring of support within the bottom groove that can easily be peeled out after print.

_Please note: This model is for personal use only per the terms of the Harter Designworks Non-Commercial Use License Agreement, attached._

RIBBED - Stacking Dish

Circular Stacking Dish - Ribbed.stl

Horizontal grooves give this dish design a lovely visual texture with banded shadows.

My modular nesting dishes stack to form any combo of colors and textures you'd like! Perfect for small objects like your keys, chapstick, cleaning cloths, trinkets, jewelry, and more. The inside of the dish is a perfectly-scoopable-with-your-fingies curved slope.

For an elevated finish, add a thin felt, cork or rubber pad to the base inside the nesting groove!

**Features**
- modular with other dishes and lids
- printable in any material (I've tested PLA, PETG and TPU)
- hand-sized for easy stacking and unstacking
- small ridge-and-groove nesting system

**Recommended Parameters**
- Arc Fitting = off 
- Wall Loops = 2
- Top Surface Pattern = Concentric
- Top Shell Layers = 6
- Bottom Surface Pattern = Monotonic
- Sparse Infill Density = 15%
- Sparse Infill Pattern = Gyroid

**Supports**
- Enable = True
- Type = normal(auto)
- Style = Snug
- On Build Plate Only = True
- This should produce a single ring of support within the bottom groove that can easily be peeled out after print.

_Please note: This model is for personal use only per the terms of the Harter Designworks
Non-Commercial Use License Agreement, attached._

BANDED - Stacking Dish

Circular Stacking Dish - Banded.stl

Smooth and minimalist, this design features NO texture on the outer surface.

BONUS: Use a Cylinder modifier shape to add fuzzy skin starting at 4mm and ending 4mm below the top face for a nice texture version.

My modular nesting dishes stack to form any combo of colors and textures you'd like! Perfect for small objects like your keys, chapstick, cleaning cloths, trinkets, jewelry, and more. The inside of the dish is a perfectly-scoopable-with-your-fingies curved slope.

For an elevated finish, add a thin felt, cork or rubber pad to the base inside the nesting groove!

**Features**
- modular with other dishes and lids
- printable in any material (I've tested PLA, PETG and TPU)
- hand-sized for easy stacking and unstacking
- small ridge-and-groove nesting system
- High-res STL can be down-res'd in slicer for better performance as necessary

**Recommended Parameters**
- Arc Fitting = off 
- Wall Loops = 2
- Top Surface Pattern = Concentric
- Top Shell Layers = 6
- Bottom Surface Pattern = Archimedean Spiral
- Sparse Infill Density = 15%
- Sparse Infill Pattern = Gyroid

**Supports**
- Enable = True
- Type = normal(auto)
- Style = Snug
- On Build Plate Only = True
- This should produce a single ring of support within the bottom groove that can easily be peeled out after print.

_Please note: This model is for personal use only per the terms of the Harter Designworks
Non-Commercial Use License Agreement, attached._


Stacking Dishes

Categories:

Tags:

Models in this collection