Umea - a standing lamp in boho style

Build your own modern standing lamp.

Fits a Bambulab X1 or P1 series

Print settings: _Shade: _ prints in vase mode (0.8mm nozzle recommended) or normal mode (0.4mm nozzle) layer height 0.56mm (0.8mm nozzle) or 0.28mm (0.4mm nozzle) in both cases print it upside down and set bottom layers to 4 (0.8) or 8 (0.4) Top: prints upside down 0.2mm layer height 3 walls minimum Cap: 0.2mm layer height 2 walls 1 bottom layer 0 top layer 30% gyroid add height range modifier: 0% infill after 1mm

Filament: For the shade use some whiteish filament. I used Spectrum PLA Ivory Beige.

Additional hardware: 3x wood rods diameter=28mm L=1370mm 6x wood screw 3,5mm 1x zip tie 1x E14 or E27 light cord