Inspired by the simplicity and elegance of tipi tents, this creative #ikeahack transforms your basic 17cm Fado lamp into a magnificent table lamp. Four wood rods, three printed parts and some hardware form this minimalistic base.

Additional hardware: 1x M6x30 cylinder head bolt 1x M6 hex nut 4x wood rods D=18mm L=395mm

How to print: The models can be printed without supports I used fuzzy skin at the main part (outer contour only; Z-seam random) Use at least 3 walls and >30% infill

How to build: Cut the wood rods to length (395mm) Finish the wood rods (sanding, finish) Insert the rods into the main part (distance from ground to main part: 178mm) Insert the nut in the tensioner and put it at the underside of the main part Insert the bolt from the top and tighten Put the Fado lamp in Enjoy :)