Marcel R

Mini tipi for Ikea Fado 17cm

by
Geoshape
Follow
Follow
Remix Model
Geoshape
Geoshape
|
Image 5 of 5
Mini tipi for Ikea Fado 17cm  3d model
Geoshape
Geoshape
|
Image 5 of 5
Mini tipi for Ikea Fado 17cm  3d model
2D
3D
Makes
Mini tipi for Ikea Fado 17cm  3d model
Mini tipi for Ikea Fado 17cm  3d model
Mini tipi for Ikea Fado 17cm  3d model
Mini tipi for Ikea Fado 17cm  3d model
Mini tipi for Ikea Fado 17cm  3d model

Inspired by the simplicity and elegance of tipi tents, this creative #ikeahack transforms your basic 17cm Fado lamp into a magnificent table lamp. Four wood rods, three printed parts and some hardware form this minimalistic base.

Additional hardware: 1x M6x30 cylinder head bolt 1x M6 hex nut 4x wood rods D=18mm L=395mm

How to print: The models can be printed without supports I used fuzzy skin at the main part (outer contour only; Z-seam random) Use at least 3 walls and >30% infill

How to build: Cut the wood rods to length (395mm) Finish the wood rods (sanding, finish) Insert the rods into the main part (distance from ground to main part: 178mm) Insert the nut in the tensioner and put it at the underside of the main part Insert the bolt from the top and tighten Put the Fado lamp in Enjoy :)


26 Likes22 DownloadsSeptember 28, 2024


26 Likes22 DownloadsSeptember 28, 2024