Modular Shelf
138 downloads · 4 days ago · **A fully 3D printed modular shelf system.**
The design is based on an 80x80 mm grid and has a dept
This model is restricted by licensing terms.
View license.
A fully 3D printed modular shelf system.
The design is based on an 80x80 mm grid and has a depth of 240 mm. All possible sizes from 80 x 80 x 240 up to 320 x 320 x 240 are included!
Instructions
- Print as many modules as you wish
- Print the according number of plugs, screws, hulls, feet and one driver
- Arrange your shelves
- Place the feet and screw them in with your driver
- Connect all modules with a hull and screw
- Place plugs in all outside facing holes
Usage You can rearrange and extend the shelf The 240 x 240 x 240 Module fits exactly 3 spools of filament and is still printable on a normal-sized print bed. Perfect for a little filament storage arrangement.
Print settings You can just print all parts in defaults settings; it will work just fine. To speed up the modules a 0.6 mm nozzle is more convenient. To give the screws a little extra strength I recommend increasing the wall count and infill a bit.
- Material: PLA
- Print direction: files are rotated correctly
- Support: none
Shelf modules
- Nozzle size: 0,6 mm advised, 0.4 works
- Wall count: 2
- Line width: 0,6 mm
- Layer height 0,3 mm
- Infill: 10%
- Build plate adhesion type: brim
All other parts
- Wall count: 3
- Nozzle size: 0,4 mm
- Line width: 0,4 mm
- Layer height 0,2 mm
- Infill: 30%
- Build plate adhesion type: none
Modular Shelf
138 downloads · 4 days ago in and
This model is restricted by licensing terms.
View license.
Infinite Notebook
Clock(lamp)
Frank the frog pen holder
Multifunctional Planter “BRBP”
Sponge holder
Tea bag dispenser
Marshmallow table
Raily – modular wall organization
Mushroom lamp “Amanita Muscaria”
Glasses case
Laundry detergent dispenser
Mushroom coat hook / hanger
Cannon spotlight lamp
Planter “Extra”
Bird feeder | suet ball holder
Cheese shelf bracket
Paper towel holder
BOXY Planters
Organic waste bin
