tracking pixel
Jonathan P

Fancy Table - Mid Century Inspired

by
FunPrints3D
Follow
Follow
Remix Model
FunPrints3D
FunPrints3D
|
Image 4 of 4
Fancy Table - Mid Century Inspired 3d model
FunPrints3D
FunPrints3D
|
Image 4 of 4
Fancy Table - Mid Century Inspired 3d model
2D
3D
Makes
Fancy Table - Mid Century Inspired 3d model
Fancy Table - Mid Century Inspired 3d model
Fancy Table - Mid Century Inspired 3d model
Fancy Table - Mid Century Inspired 3d model
This model is restricted by licensing terms. 

This table is easy to print and easy to assemble and it looks great! It's awesome for displaying your 3d printed stuff. You could use it for holding your planters or as a pedestal. You can scale this up if you have a big enough printer and make yourself a full sized end table.

By default this Table is ~9inches wide and 12.5inches high.

Do not over tighten the threads and when you twist them on be sure to hold the wide section near the threads on the stem. If you want this to be permanent you can add some glue to the threads.

You will need support for the table legs. I used normal support at ~60 degrees (cura), ~30 degrees (Bambu Studio) and a brim. You can print the Stem and the top support free in the upside down orientation for each.

I have included a FancyTableOnePiece file as well. You probably won't be able to go as big with this file depending on the height dimension of your build volume, however, you should be able to print this one support free, upside down.

Have fun printing and enjoy!


12 Likes20 DownloadsNovember 1, 2024


12 Likes20 DownloadsNovember 1, 2024
This model is restricted by licensing terms.