This table is easy to print and easy to assemble and it looks great! It's awesome for displaying your 3d printed stuff. You could use it for holding your planters or as a pedestal. You can scale this up if you have a big enough printer and make yourself a full sized end table.

By default this Table is ~9inches wide and 12.5inches high.

Do not over tighten the threads and when you twist them on be sure to hold the wide section near the threads on the stem. If you want this to be permanent you can add some glue to the threads.

You will need support for the table legs. I used normal support at ~60 degrees (cura), ~30 degrees (Bambu Studio) and a brim. You can print the Stem and the top support free in the upside down orientation for each.

Have fun printing and enjoy!