This is an upgraded version of the flexi Liopleurodon I published on Thingiverse. Newly added are striated skin and tiger pattern-like patterns reminiscent of marine animals. https://www.thingiverse.com/thing:6682205 The set includes two types of Liopleurodon (MouthOpen/Close type and NoMouthOpen type) and two types of Stand (one with decorations and one without). The full set of products can accommodate a variety of options and will be useful for commercial use.
This model includes the following digital content, 01: STL - Liopleurodon 02: STL - Liopleurodon(NoMouthOpen) 03: 3mf (Bambu) - Liopleurodon 04: 3mf (Bambu) - Liopleurodon(NoMouthOpen) 05: STL - Stand 06: 3mf (Bambu) - Stand 07: 3mf (Prusa) - Liopleurodon 08: 3mf (Prusa) - Liopleurodon(NoMouthOpen) 09: 3mf (Prusa) - Stand
03, 04, 06 are 3mf files for multi-color that are compatible with Bambu Studio, and 07, 08, ,09 are 3mf files for Prusa Slicer. If you want to do multi-color prints, please use these files. 2 types of 3mf files are available: "Low" is 3-color file with no pattern coloring and "High" is 3-color file with the pattern. NoMouthOpen will be a 4-color file with additional tooth colors. I general, multi-printing produces amount of flushed filament(garbage) equal to the amount of filament needed for the model. For those who don't like this, I recommend the "Low" file. This file is colored to reduce the number of filament changes, although the coloring of the pattern is omitted, the pattern itself is represented by a mesh, so you can be assured of sufficient quality. Please multi-printing that suits you best. *After April 2024, Bambu and Prusa 3mf files will be compatible with each other, so there is no need to use them differently. Only the set colors will be reflected unless imported into the corresponding slicer software. For the convenience of multi-printing, the 3mf for this model specifies the color of the object itself in addition to the surface paint. Since these color specifications are not compatible, please use various dedicated 3mf files. Also, these 3mf files are only compatible with Bambu Lab and Prusa printers. Therefore, they are not compatible with other companies' dual-head printers.
Only MouthOpen type and stand needs to be assembled. Please refer to GIF and photo when assembling it. For the type with open/close mouth, apply adhesive to the head parts and insert them into the body from the front to assemble. The stand also comes in two variations: regular one and simplified "Lite" version. The regular version is decorated with sunken ship and starfish, while the "Lite" version has simplified design for quick printing. Please choose whichever you prefer to use here as well.
Print in Place with no supports. Please take pictures of your Flexi and share them with us!
💰Commercial Use💰 This model is granted "CULTS CU-ND - COMMERCIAL USE - NO DERIVATIVE" and may be used commercially within the terms of use. Ex) Sell 3D printed Flexi on Etsy, flea markets, etc. For more information, please see the terms and conditions below. https://cults3d.com/en/licenses#cults_cu_nd ⚠Attention⚠ Only this model can be used for commercial purposes; the free version of the model cannot be used for commercial purposes. (Because free version is already licensed under the "CC BY-NC-ND 4.0" or "CC BY-NC-SA 4.0" non-commercial use license. Also, selling free version that cannot be used for commercial purposes may cause customers to misunderstand that you are selling it without permission.)
⚠Warning⚠ Be careful in environments with young children and pets! This model contains small parts. If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury. If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.
Do not apply strong force! Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries. In addition, debris from damage to the model may be accidentally ingested by infants or pets. If the model is damaged, dispose of it immediately.
Store them in an appropriate place. After 3D printing, store the model in an appropriate place out of reach of young children and pets. Proper adherence to the precautions will ensure safe use of the model.
🖨Print Setting🧵 Rafts: No Supports: No Build Plate Adhesion Type: Skirt or None Layer Height: 0.1-0.3mm Infill:15-20% Filament material: PLA
{Recommend} Layer Height: 0.2mm Print Speed: 60mm/s Outer Wall Speed: 10mm/s Z Seam Alignment: User Specified Z Seam Position: Right (Body), Left(Head) Z Seam Corner Preference: Hide Seam
{Recommend: Bambu Lab Printer} Layer Height: 0.2mm Seam Position: Aligned Wall Loops: 3 First layer: 30mm/s Outer wall: 30mm/s Prime Tower Width: 10mm Prime Volume: 10mm^3 Prime Tower Brim Width: 0mm