This is an upgraded version of the Flexi Leaf Dragon I published on Thingiverse. https://www.thingiverse.com/thing:6446798 The following details have been added compared to the free version. ・Scales added to the head and limbs ・Newly sculpted large leaf scales on the back ・Stripes have been added to the leaves on the tail and mane
This model includes the following digital content 01: STL - Leaf Dragon(Long Size) 02: STL - Leaf Dragon(Medium Size) 03: 3mf (Bambu)- Leaf Dragon(Long Size) 04: 3mf (Bambu)- Leaf Dragon(Medium Size) 05: STL - Dragon Stand 06: 3mf (Prusa)- Leaf Dragon(Long Size) 07: 3mf (Prusa)- Leaf Dragon(Medium Size)
03 and 04 are 3mf files for multi-color that are compatible with Bambu Studio, and 06 and 07 are 3mf files for Prusa Slicer. If you want to do multi-color prints, please use these files. *After April 2024, Bambu and Prusa 3mf files will be compatible with each other, so there is no need to use them differently. (Only the set colors will be reflected unless imported into the corresponding slicer software.)
There are Three types of models, square type (170mmx160mm), wide type (240mmx125mm), and straight type, which can be used according to the bed size of the 3D printer. If your 3D printer has a bed size of 250mmx250mm or larger, such as "Bambu Lab P1P", you can make up to Two dragons at once. (using wide type) This set also includes a medium size model (ONLY SQUARE TYPE) as an extra. Please choose your favorite size and 3D print it. Print in Place with no supports. No assembly required. Only the stand on which the dragon can be displayed needs to be assembled. Please refer to the second GIF and the 7th photo when assembling the 3d printed. Stand #3 should be oriented with the numbers to the right and stand #4 should be oriented with the numbers toward the front. Please take pictures of your Flexi and share them with us!
💰Commercial Use💰 This model is licensed for commercial use only as 3D printed without modification. The content of this license is the same as Cults' "CULTS CU-ND" and Printables Store's "CU-ND". Ex) Sell 3D printed Flexi on Etsy, flea markets, etc. For more information, please see the terms and conditions below. ↓CULTS CU-ND https://cults3d.com/en/licenses#cults_cu_nd ↓Printables Store CU-ND (See the “License” section.) https://www.printables.com/model/752042-flexi-leaf-dragon-mark-ii-setprint-in-place ⚠Attention⚠ Only this model can be used for commercial purposes; the free version of the model cannot be used for commercial purposes. (Because free version is already licensed under the "CC BY-NC-ND 4.0" or "CC BY-NC-SA 4.0" non-commercial use license. Also, selling a free version that cannot be used for commercial purposes may cause customers to misunderstand that you are selling it without permission.) All Flexseeds Designs are protected under Copyright Law. Any redistribution or modification of the model as digital data, whether for free or for a fee, is not permitted. ※There are no restrictions on the color of filament used for 3D printed products.
⚠Warning⚠ Be careful in environments with young children and pets! This model contains small parts. If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury. If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.
Do not apply strong force! Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries. In addition, debris from damage to the model may be accidentally ingested by infants or pets. If the model is damaged, dispose of it immediately.
Store them in an appropriate place. After 3D printing, store the model in an appropriate place out of reach of young children and pets. Proper adherence to the precautions will ensure safe use of the model.
🖨Print Setting🧵 Rafts: No Supports: No Layer Height: 0.1-0.3 mm Infill:15-20% Filament material: PLA
{Recommend} Layer Height: 0.2mm Print Speed: 60mm/s Outer Wall Speed: 20mm/s Z Seam Alignment: Sharpest Corner Z Seam Corner Preference: Hide Seam
{Recommend: Bambu Lab Printer} Layer Height: 0.2mm Seam Position: Aligned Wall Loops: 3 First layer: 30mm/s Outer wall: 30mm/s Prime Tower Width: 10mm Prime Volume: 10mm^3 Prime Tower Brim Width: 0mm