tracking pixel
3D F

Flexi Holding Cat (Print-in-place)

by
FlexSeeds
Follow
Follow
Remix Model
FlexSeeds
FlexSeeds
|
Image 10 of 11
Flexi Holding Cat (Print-in-place) 3d model
FlexSeeds
FlexSeeds
|
Image 10 of 11
Flexi Holding Cat (Print-in-place) 3d model
2D
3D
Makes
Flexi Holding Cat (Print-in-place) 3d model
Flexi Holding Cat (Print-in-place) 3d model
Flexi Holding Cat (Print-in-place) 3d model
Flexi Holding Cat (Print-in-place) 3d model
Flexi Holding Cat (Print-in-place) 3d model
Flexi Holding Cat (Print-in-place) 3d model
Flexi Holding Cat (Print-in-place) 3d model
Flexi Holding Cat (Print-in-place) 3d model
Flexi Holding Cat (Print-in-place) 3d model
Flexi Holding Cat (Print-in-place) 3d model
Flexi Holding Cat (Print-in-place) 3d model
This model is restricted by licensing terms. 

Extra service "Flexi Holding Ca Mark-Ⅱ Set" released!! https://cults3d.com/en/3d-model/art/flexi-holding-cat-mark-set-print-in-place https://flexseedsshop.etsy.com/jp/listing/1776950575/flexi-holding-cat-mark-2-set-stl-file If purchased, commercial use license and 3mf files are available. And 3 type eye models and keychain types are available. ※Keychain type is included only in the paid version. And, another version is now available! ↓Calico cat https://cults3d.com/en/3d-model/art/flexi-holding-calico-cat-set-print-in-place https://flexseedsshop.etsy.com/jp/listing/1766941684/flexi-holding-calico-cat-set-stl-file

This model was inspired by the way a cat's torso lengthens when it is carried in the arms (like Longcat meme). Finally, the model was finished with a high degree of flexibility, allowing it to curl up and lean back in a variety of poses. There are two types of models: a standard length and a long type, which is the same as when the cat is stretched out in the arms. Choose whichever you like and hug the cat!

Print in Place with no supports. No assembly required. Please take pictures of your Flexi and share them with us!

💰Commercial Use💰 This model is not available for commercial use under "CC BY-NC-ND 4.0" below. Therefore, I am selling the upgraded model with additional detailing and a license for commercial use. If you want to sell my model commercially, please check my Cults, and Etsy. https://cults3d.com/en/design-collections/3dflexseeds/commercial-use-ver https://flexseedsshop.etsy.com ⚠Attention⚠ Only this model can be used for commercial purposes; the free version of the model cannot be used for commercial purposes. (Because free version is already licensed under the "CC BY-NC-ND 4.0" or "CC BY-NC-SA 4.0" non-commercial use license. Also, selling a free version that cannot be used for commercial purposes may cause customers to misunderstand that you are selling it without permission.) All Flexseeds Designs are protected under Copyright Law. Any redistribution or modification of the model as digital data, whether for free or for a fee, is not permitted. ※There are no restrictions on the color of filament used for 3D printed products.

⚠Warning⚠ Be careful in environments with young children and pets! This model contains small parts. If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury. If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.

Do not apply strong force! Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries. In addition, debris from damage to the model may be accidentally ingested by infants or pets. If the model is damaged, dispose of it immediately.

Store them in an appropriate place. After 3D printing, store the model in an appropriate place out of reach of young children and pets. Proper adherence to the precautions will ensure safe use of the model.

🖨Print Setting🧵 Rafts: No Supports: No Build Plate Adhesion Type: Skirt or None Layer Height: 0.1-0.3mm Infill:15-20% Filament material: PLA

{Recommend} Layer Height: 0.2mm Print Speed: 60mm/s Outer Wall Speed: 10mm/s Z Seam Alignment: User Specified Z Seam Position: Right Z Seam Corner Preference: Hide Seam

{Recommend: Bambu Lab Printer} Layer Height: 0.2mm Seam Position: Aligned Wall Loops: 3 First layer: 30mm/s Outer wall: 30mm/s Prime Tower Width: 10mm Prime Volume: 10mm^3 Prime Tower Brim Width: 0mm


11 Likes16 DownloadsOctober 31, 2024




11 Likes16 DownloadsOctober 31, 2024
This model is restricted by licensing terms.