Christmas tree for A1 and A1 mini) I have been unable to get great results on the p1s because of how the printer handles cooling and air. You need the fans on the tool head of the a1 series to be able to cool the strands enough to set horizontally.

prints perfectly every time on the A series and I've printed a ton of test models.

you are more than welcome to try on the p1s and x1c to see if you can get decent results and upload the profile.

so for settings, under speed, change the bridge speed to 20mm/s. if your downloading the profile this will already be changed.

must be printed at 0.2 layer height as the tree branches are the exact width of a pass back and forth. and 0.28mm in height which prints at 1 layer.

infill set at 15%.

but a great little table decoration and just 18 grams of filament. looks great in a dual or tri colour filament.