This was a pan that my sister needed for some doll thing, so I decided to post this here if someone needs this for some really strange reason. I hope that this works for you! :)

Doll Sized Cookie Mold or Pan

This is one of those legos that look like a stud, but they're a bit longer. Again, I don't know exactly what these are called, but here you go! To scale ~0.01 MM. :)

Lego Cylinder Stud Thingy

This is one of those legos that look like a stud, but they're a bit longer. Again, I don't know exactly what these are called, but here you go! To scale ~0.01 MM

This is one of those Lego staffs! I used to use these all the time as a kid for weapons, which is why I'm calling it a staff because I don't know the "technical" term. I hope you like it! It's pretty close to scale ~0.01 MM. :)

Lego Staff

This is one of those Lego staffs! I used to use these all the times as a kid for weapons, which is why I'm calling it a staff because I don't know the "technical" term. I hope you like it! It's pretty close to scale ~0.01 MM

Just a simple stud, what else would a person ask for? To scale(as best I could. Probably off by a couple 0.01 MMS) :)

Lego Stud

Just a simple stud, what else would a person ask for? To scale(as best I could. Probably off by a couple .01 MMS) :)

This is a replication of a little toy that my younger brother has! He loves it and I might 3D print some to replace the ones that we lost! It's a pretty simple design and I made it in a couple of hours.

Here is a link to the original one if you just want to buy it: https://www.amazon.com/Agirlgle-Building-Educational-Preschool-Assembled/dp/B07D8QCWLT/ref=sr_1_7?dchild=1&keywords=widget+toy&qid=1620856387&sr=8-7

Widget Toy

3.stl

My submission for the 3DPN speaker cover! The swirl in the middle looks a little weird because I used polygons, but I think it's pretty cool anyways! :)

#3DPNSpeakerCover

#3DPNSpeakerCover

My submission for the 3DPN speaker cover! The swirl in the middle looks a little weird because I used polygons, I think it's pretty cool anyways! :)

#3DPNSpeakerCover

A pretty cool lightsaber that I designed a couple of weeks ago. I hope you like it! :)

Custom Lightsaber

A cool little pyramid that you can put under your things that you are going to spray paint with! I just modeled it up really quickly and it looks pretty good! :)

Spray Painting Tool

A cool little pyramid that you can hold your things that you are going to spray paint with! I just modeled it up really quickly and it looks pretty good! :)

This is a little runway for a catenary curve. A catenary curve is when you have a shape that doesn't roll, like a square, then make a runway for it so it CAN roll. To put it together, you put a normal catenary curve and connect it to a mirrored one. I recommend printing it on the larger side, so you don't need any supports. The Bigger sides are there to support the cube and make sure it doesn't fall off. I haven't tried this yet and just put it on, so if it doesn't work, tell me and the comments and I'll try fixing it. These are super cool and I hope you have fun printing them! :)

Link to a catenary curve video explaining it:https://youtu.be/iP_yb0gDtKg

Super cool catenary curve BIKE video:https://youtu.be/FlvjWpWu99A

Catenary Curve

CatenaryCurve.stl

A cool little cardholder. It should fit standard size Bicycle Playing Cards and ones that are like it. Most cards are like it. If the measurements are off, please tell me in the comments and I'll check it out. There should also be some extra room in case the cards are bent or messed up. Happy printing! :)

Card Case

DeckCase.stl

I don't know why you would want to print this, but here you go! It's a pretty good representation, but it's not perfect. :)

Sharpie

SharpiePen.stl

Okay, this is a weird model. The reason I made it was because, during the summer, I would eat popsicles ALL THE TIME. It got so bad that I would have stacks of it on my desk. Then I had a great idea! I would 3D Print a popsicle holder! So I did. Here you go. I hope you like it. :)

12PopsicleHolder

I'm actually SUPER excited to bring this model to you! I really wanted a 3D printed yoyo because I have been doing yoyoing for about two and a half years and I love 3D printing. I watched some videos on it and decided that I would design my own, so I set to work. I printed this out at 90% infill and it was actually still very light for a yoyo, so I recently changed it to some thicker parameters to make it heavier. You need 19mm pads for the response and a Size C bearing. This one plays unresponsive, but sometimes it just comes to your hand randomly( I don't know why, but I think it's because of print defects). I don't think you need supports and I don't know what side nut and bolt I used, but the diameter of it is 8.5mm and you can just get the nuts and bolts at the hardware store. The bolt length doesn't matter because you can just cut it off carefully( I did this and It was kind of hard to put on, but I was able to get it with a hacksaw). I really hope you like this and it's actually one of my favorite projects so far! :) 

P.S. If all of this yoyo stuff doesn't make any sense to you, I'll put in some links to yoyo websites and the differences between unresponsive to responsive yoyoing.

YoyoTricks https://yoyotricks.com/
YoyoExpert https://yoyoexpert.com/
How To Yoyo https://yoyotricks.com/yoyo-tricks/beginner-tricks/

3DPrintedYoyo

I'm Actually SUPER excited to bring this model to you! I really wanted a 3D printed yoyo because I have been doing yoyoing for about two and a half years! I watched some videos on it and decided that I would design my own, so I set to work. I printed this out at 90% infill and it was actually still very light for a yoyo, so I recently changed it to some thicker parameters to work well. You need some 19mm pads for the response and a Size C bearing. This one plays unresponsive, but sometimes it just comes to your hand randomly( I don't know why, but I think it's because of print defects). I don't think you need supports and I don't know what side nut and bolt I used, but the diameter of it is 8.5mm and you can just get the nuts and bolts at the hardware store. The bolt length doesn't matter because you can just cut it off carefully( I did this and It was kind of hard to put on, but I was able to get it with a hacksaw). I really hope you like this and it's actually one of my favorite projects so far! :)

A very weird vase that I decided to make. It's an idea where you could have a shape with different sides, then made a weird shape in the middle, then ending with another shape with straight lines. There are also some weird angles, so if you can't print it, just tell me in the comments and I'll say that you can't print it. I hope you like it! :)

Weird Vase

A very weird vase that I decided to make. It's an idea where you could have a shape with different sides, then made a weird shape in the middle, then ending with another shape with straight lines. I hope you like it! :)

This is a version of the fish I made, but it actually has a chamfer inside the mouth so It can be printed without supports! You just need to put the mouth on the bed.

Video of GIANT Print of it!: https://youtu.be/OJa0SCkPBdQ

LegoFishEZPrint

This is a version of the fish I made, but it actually has a chamfer inside the mouth so It can be printed without supports! You just need to put the mouth on the bed.

This certainly was a test for my designing skills! I just decided to do it and it took about three hours to design. This is not perfect and the body is actually a bit weird, but it is to size and I also added a very high quality version that takes up a BUNCH of storage, so only use that if you are going to scale it up. Other than that, enjoy!

Lego Fish

LegoFishHighQuality

A very accurate and high-quality lego mug. It is also to scale so if you want to make it life-sized, you'll have to scale it up. I also was able to print it upside-down without any supports, but it left some holes inside the cup, so if you want to use this as a real mug, I recommend printing it right side up. I hope you like it! :)

Lego Mug

A very accurate and high-quality lego mug. It is also to scale so if you want to make it life-sized, you'll have to scale it up. I hope you like it! :)

This is a really fun game that I kind-of designed while watching Make Anything's video so credit goes to him! This version has magnet holes, which are super useful for traveling and such. The magnets you need are 3mm by 6mm. I've played this game dozens of times and I love it!

Make Anything's Tutorial:
https://youtu.be/2df5ss5HqjI

Rota Game

The board of the game Rota.
You should only need to make one of these.

RotaBoard

I just saw this in my project folder and decided to add it on here, so yeah...

Fidget Spinner Body

Just a little pebble I quickly designed for the Game Mancala. I might come out with a 3D Printable Mancala board, so look out for that!

Mancala Piece

A chicken keychain. Don't ask why I made it, JUST PRINT IT! :)

Chicken Keychain

A pretty easy test for your 3D printer and I think looks pretty cool!

Beat Buster!

This is the hook I made for the Polymaker Hook Challange. The rules were that there couldn't be any closed holes and that it had to fit a specific metal hook. You probably shouldn't use this to put on a bunch of load, but I just thought to put it on here! :)

Hook from Polymaker Hook Challange

This is the hook I made for the Polymaker Hook Challange

Polymaker Hook Challange

This is a really cool bullet holder for your Nerf gun and is pretty easy to print and I can assure you, it is really fun and useful in a Nerf war!

Nerf Bullet Clip

Just a little keychain for your mom! I'm sorry if it's not loading, it's a pretty big file.

#1 Mom! Keychain

#1! Keychain.stl

This is just an aesthetic boomerang and actually doesn't work, but it's still fun to print and post-process!

Boomerang

The whole of the boomerang which I do not recommend printing this as, but you might want to just in case!

BoomerangWhole.stl

DadKeyChain.stl

This is a two-way rolling "sphere" from Makers Muse's video.

TwoWayRoller

Pumpkin.stl

To learn how to play this game, look it up on Youtube. These are the different pieces to the Royal Game of Ur and the X at the end of the name is how many you should make. This version is magnetic and you should need circular 3mm by 6mm size magnets. You also might want to paint it to make it look good. I did that and the tolerances are pretty big, so don't worry about that.

UrLidX1.stl

UrDiceX4.stl

UrPieceX14.stl

UrBoxX1.stl

A great Mother's day present or birthday gift

BestMotherEverPresent

I designed this after watching a video about it on Makers Muse

MobiusStrip

My_Maker_Coin

It's a spoon made by me. You're welcome 😉

Spoon

I love making and uploading files, then 3d printing them. I hope you do too!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

ElijahC

Achievements

Seedling

Trailblazer

Up and Coming