Doll Sized Cookie Mold or Pan

This was a pan that my sister needed for some doll thing, so I decided to post this here if someone needs this for some really strange reason. I hope that this works for you! :)

Lego Cylinder Stud Thingy

This is one of those legos that look like a stud, but they're a bit longer. Again, I don't know exactly what these are called, but here you go! To scale ~0.01 MM

Lego Staff

This is one of those Lego staffs! I used to use these all the times as a kid for weapons, which is why I'm calling it a staff because I don't know the "technical" term. I hope you like it! It's pretty close to scale ~0.01 MM

Lego Stud

Just a simple stud, what else would a person ask for? To scale(as best I could. Probably off by a couple .01 MMS) :)

Widget Toy

3.stl

#3DPNSpeakerCover

My submission for the 3DPN speaker cover! The swirl in the middle looks a little weird because I used polygons, I think it's pretty cool anyways! :)

#3DPNSpeakerCover

Custom Lightsaber

A pretty cool lightsaber that I designed a couple of weeks ago. I hope you like it! :)

Spray Painting Tool

A cool little pyramid that you can hold your things that you are going to spray paint with! I just modeled it up really quickly and it looks pretty good! :)

Catenary Curve

CatenaryCurve.stl

Card Case

DeckCase.stl

Sharpie

SharpiePen.stl

12PopsicleHolder

Okay, this is a weird model. The reason I made it was because, during the summer, I would eat popsicles ALL THE TIME. It got so bad that I would have stacks of it on my desk. Then I had a great idea! I would 3D Print a popsicle holder! So I did. Here you go. I hope you like it. :)

3DPrintedYoyo

I'm Actually SUPER excited to bring this model to you! I really wanted a 3D printed yoyo because I have been doing yoyoing for about two and a half years! I watched some videos on it and decided that I would design my own, so I set to work. I printed this out at 90% infill and it was actually still very light for a yoyo, so I recently changed it to some thicker parameters to work well. You need some 19mm pads for the response and a Size C bearing. This one plays unresponsive, but sometimes it just comes to your hand randomly( I don't know why, but I think it's because of print defects). I don't think you need supports and I don't know what side nut and bolt I used, but the diameter of it is 8.5mm and you can just get the nuts and bolts at the hardware store. The bolt length doesn't matter because you can just cut it off carefully( I did this and It was kind of hard to put on, but I was able to get it with a hacksaw). I really hope you like this and it's actually one of my favorite projects so far! :)

Weird Vase

A very weird vase that I decided to make. It's an idea where you could have a shape with different sides, then made a weird shape in the middle, then ending with another shape with straight lines. I hope you like it! :)

LegoFishEZPrint

This is a version of the fish I made, but it actually has a chamfer inside the mouth so It can be printed without supports! You just need to put the mouth on the bed.

Lego Fish

LegoFishHighQuality

Lego Mug

A very accurate and high-quality lego mug. It is also to scale so if you want to make it life-sized, you'll have to scale it up. I hope you like it! :)

Rota Game

The board of the game Rota.
You should only need to make one of these.

RotaBoard

Fidget Spinner Body

I just saw this in my project folder and decided to add it on here, so yeah...

Mancala Piece

Just a little pebble I quickly designed for the Game Mancala. I might come out with a 3D Printable Mancala board, so look out for that!

Chicken Keychain

A chicken keychain. Don't ask why I made it, JUST PRINT IT! :)

Beat Buster!

A pretty easy test for your 3D printer and I think looks pretty cool!

Hook from Polymaker Hook Challange

This is the hook I made for the Polymaker Hook Challange

Polymaker Hook Challange

Nerf Bullet Clip

This is a really cool bullet holder for your Nerf gun and is pretty easy to print and I can assure you, it is really fun and useful in a Nerf war!

#1 Mom! Keychain

#1! Keychain.stl

Boomerang

The whole of the boomerang which I do not recommend printing this as, but you might want to just in case!

ElijahC

Achievements

Seedling

Trailblazer

Fan Favorite