tracking pixel
Jonathan  S

Greninja Shuriken Spinner Mini - Pokemon

by
Dice3D Designs
Follow
Follow
Remix Model
Dice3D Designs
Dice3D Designs
|
Image 2 of 3
Greninja Shuriken Spinner Mini - Pokemon 3d model
Dice3D Designs
Dice3D Designs
|
Image 2 of 3
Greninja Shuriken Spinner Mini - Pokemon 3d model
2D
3D
Makes
Greninja Shuriken Spinner Mini - Pokemon 3d model
Greninja Shuriken Spinner Mini - Pokemon 3d model
Greninja Shuriken Spinner Mini - Pokemon 3d model
This model is restricted by licensing terms. 

Introducing the 4-Point Shuriken famously used by Greninja in Pokemon but as a small fidget spinner! It is print in place with no supports but you may need to use a brim or adhesive on your bed because of the bearings. I don't use either though I have a Sliceworx flex dipped plate (works amazing for adhesion). This version is about the size of an adult's palm and the center ring can fit half your finger through at 100% scale.


9 Likes32 DownloadsNovember 10, 2024


9 Likes32 DownloadsNovember 10, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.2mm

MaterialPLA
Layer height0.2 mm
Infill density10 %
SupportsNone
BrimYes