FDMS8 Powered Subwoofer by Deposition Sound

This is a 3D printable cabinet for an 8" powered subwoofer by Deposition Sound LLC. If you have a medium/small living space that is in desperate need of thick, juicy, and fast bass, these are just for you! They have been carefully tuned to 33Hz, with in-room extension down to the mid 20's Hz!

It is printed in 4 main quadrants, requiring roughly 1 kg of filament each. Assembly instructions coming soon! Check out https://www.depositionsound.com/ for updates and feel free to contact us with questions. Kit can be purchased here: https://www.depositionsound.com/shop

Woofer = Dayton Audio DCS205-4 Plate Amp = Dayton Audio SPA100-D x12 M5 brass threaded inserts x12 M5 x 16mm button head hex socket bolts x12 M3 brass threaded inserts x12 M3 x 12mm button head hex socket bolts Lots of CA glue (assembly order matters), thicker the better!

Be sure to trim and strip the connectors on the plate amp wires. That way the 8" woofer spring connectors can receive the bare wire. Stuff 2oz of Poly-Fil into each quadrant and you're ready to rock. If using a slow curing adhesive, allow for ample cure time as this little 8" woofer will generate high pressure loads!

Note: We include flat-bottom feet that receive foam rubber pads for hard flooring. If you're placing these subs on a thick shag carpet, we recommend the spikes.