Stand for 75356 Executor Super Star Destroyer
2-piece set to display the Lego set. Lower then original stand and displays set broadside at angle of printed Arm piece. Designed for use on a high shelf to show more of the top side then the underneath.
Files included for 0°, 5°, 10°,12.5° and 15° angled arm pieces (rough estimate for angle) Pictures show set displayed with 15° Arm piece.
2 pieces to be printed, Arm piece slots into tabs on Base part.
Print Base piece with flat piece on printer bed. Print Arm piece with large open square on printer bed and tabs facing upward.Use's both 2x4 Lego plates from the original stand to connect to underside of the SSD set. These fit snugly into the open square on the Arm piece (May require slight shave if any elephants foot style issues on printer)
Existing triangular side pieces need to be moved out to allow the stand to sit flush to the SSD. (example pic shown)
I printed parts in PETG with at 0.4mm with a 0.6 nozzle and have had no issues at all. 3 or 4 perimeters/shells recommended.
This is the first iteration of the wall mount for this set I've designed, so its a bit rough around the edges, I may update it if I can simplify or upgrade it in the future.
UPDATE: 26-May-2023
Added additional Arm pieces at 0°, 5°, 10° and 12.5° degrees (rough estimate) Original piece is around 15°