ORB | String Art Pendant Light E27 & E26 fast print

ORB | String Art Pendant Light E27 & E26 fast print

String art meets lighting design.

The ORB pendant light has a diameter of Ø249.5mm and can be printed with a regular 0.4mm nozzle.

The mounting bracket can fit E27, E26 sockets.

You can get the power cords from Amazon here:
 For Europe: E27 cord:  https://amzn.to/3OVrZjK

For the US: E26/E27 cord:  https://amzn.to/3U0Xyvy

Happy printing!

DIMENSIONS | Ø 249.5 mm x H 430 mm

3D PRINT SETTINGS: The two discs have to be printed flat. You may have to rotate them in your slicer as they are oriented vertically in the STL (it was too much of a hastle to rotate all the elements in my 3D model without messing up everything... sorry about that).

The mounting bracket prints upright and the STL is already oriented properly.

The only trick for the discs is to set the layer height to 0.3mm. You may have to set the "line width" to about 0.42mm and the "overhang speed" to 30mm/s. This is by default in Bambu Studio, but you may have to set it manually if you use other slicers and printers.

For BambuLab users, turn on "Arachne" mode in the "Wall Generator" settings.

DISC: Wall line count: 2 Layer height: 0.3mm/layer or less Infill: 15% top/bottom layer pattern: concentric Build adhesion type: None Supports: None

E27 BRACKET: Wall line count: 2 Layer height: 0.2mm/layer Infill: 30% Build adhesion type: None. Supports: None