tracking pixel
CharlesRegaud

CANNELÉ | Fast-print mini Planter

by
CharlesRegaud
Follow
Follow
Remix Model
CharlesRegaud
CharlesRegaud
|
Image 6 of 6
CANNELÉ | Fast-print mini Planter 3d model
CharlesRegaud
CharlesRegaud
|
Image 6 of 6
CANNELÉ | Fast-print mini Planter 3d model
2D
3D
Makes
CANNELÉ | Fast-print mini Planter 3d model
CANNELÉ | Fast-print mini Planter 3d model
CANNELÉ | Fast-print mini Planter 3d model
CANNELÉ | Fast-print mini Planter 3d model
CANNELÉ | Fast-print mini Planter 3d model
CANNELÉ | Fast-print mini Planter 3d model

CANNELÉ | Fast-print mini Planter

Want to buy a physical 3D print of this product? Head to Trajann online store.

Here is a free standing AND fast-print version of my original CANNELÉ mini wall planter!

The printing time is only 2 to 2.5 hours, so half the time needed to print the original one.

This mini planter also comes with a twist-lock drip tray.

Have fun mix and matching the colours, or print it all the same for a more solid look!

Happy printing!

DIMENSIONS | Ø 100mm x H 100 mm (inner diameter is 8.5cm)

PRINTING | Planter ~2.5h | Drip Tray ~1.2h

3D PRINTING SETTINGS For a watertight dip tray, make sure your printer is well calibrated and lubricated. Then, increase the wall line count to 3. That should do it!

Resolution: 0.2mm / layer or less Infill: gyroid 15~20% Wall line count: 3 Build adhesion type: None Supports: None


9 Likes25 DownloadsDecember 26, 2023


9 Likes25 DownloadsDecember 26, 2023