tracking pixel
Profile Image
CK 3D Prints
CK 3D Prints

CK 3D Prints

We're just a couple of camera, drone and design nerds making good stuff to fix (mostly) poorly made stuff. We also design other stuff like gifts, functional products, and yes, even flexi stuff. Though we are functional before flexi, we do have plenty of flexi designs on the way to help you stay competitive. We also try to add mechanical or functional features to these designs whenever possible.

Follow

Select a membership plan

Model is included in this plan
Available now

29% off
CK Flexi and Functional Commercial License
$7.10
/ month
when billed annually

**** 10-16-2024 - CURRENTLY UPLOADING OUR FILES FROM OTHER PLATFORMS. Expect 12+ models by 10/20/2024, including our Marble Track system, Ferris Wheel, and Butterflies with cartoon and semi realistic flexi models. PLUS MORE! If you don't want to sign up today, check back around the 20th! ****

Download and print our entire catalog of engineering designs, inspired Flexi Critters, mechanical prints, desk organizers, practical prints, and attention-grabbing 3D Booth Displays to help you draw customers at events. We are constantly dreaming up new ideas we can't wait to share with you! πŸ₯°

About CK Designs:

MOST of our models are print-in-place with NO supports needed. Some of our designs may be a bit more complex and require some supports and tuning depending on the type of design.

We spend hours dialing in our designs to be mechanically strong, flexible, and fun. We found an innovative way to design the joints system for our Flexi models and it has proven to create more durable, interactive and articulating models.

Here's what you can expect when joining our CK Tribe!

This is for a commercial use license. Meaning you can sell your prints anywhere! The license is only active as long as your membership is active. You can sell anything you print, but you cannot sell our files or share them with anyone. *If you cancel your Membership, you can no longer sell any prints from our design catalogs, until you reactivate your membership.

Cliff K

Flexi Jumping Spider πŸ•·

by
CK 3D Prints
Follow
Follow
Remix Model
CK 3D Prints
CK 3D Prints
|
Image 1 of 5
Flexi Jumping Spider πŸ•· 3d model
CK 3D Prints
CK 3D Prints
|
Image 1 of 5
Flexi Jumping Spider πŸ•· 3d model
2D
3D
Makes
Flexi Jumping Spider πŸ•· 3d model
Flexi Jumping Spider πŸ•· 3d model
Flexi Jumping Spider πŸ•· 3d model
Flexi Jumping Spider πŸ•· 3d model
Flexi Jumping Spider πŸ•· 3d model
0Β Likes0Β DownloadsOctober 16, 2024

Instructions

Filament β€’ 0.16mm

MaterialPLA
Layer height0.16 mm
Infill density20 %
SupportsNone
BrimNo
MulticolorAutomatic material system (AMS)
Fuzzy skinOff

Wuzzz up πŸ˜› it's Kajun! Looking for the cutest, realistically proportioned jumping spider that fully articulates and can be easily customized? Look no further! This is my Flexi Jumping Spooder, inspired by one of my own pet spiders, Sabrina.Β 

Cliff and I put so much time, research, and refining into this design to get it just right and to make it printable for everyone, regardless of machine, filament type, and scale! We wanted this model to be both cute and fully articulating. This required us to use multiple software to get the look and functionality we wanted. Sabrina's head and body was modeled in Blender, while Sabrina's legs and abdominal undercarriage were made in Fusion 360 for a totally articulating model that prints in place & HAS NO SUPPORTS. (But we recommend using primitive discs on the toebeans for extra adhesion!) πŸ˜‰πŸ•·

Design & Print Details:

I modeled this spood after Bold and Regal Jumping Spiders with some abstract details to make them cartoonish and fun. They can be customized to look however you want with some basic painting! We painted some of ours in the Bambu slicer for a more detailed look. These are also fun to hand paint! -My personal favorite pastime is painting spoods.

Spinneret spool and attachment clip holes have been added for mounting and wearing as accessories, like you see me rocking my spood in my hair) πŸ€˜πŸΌπŸ•·

I hope you love this little spood as much as I loved getting to make it and please reach out if you have any questions or suggestions! πŸ•·πŸ–€

Print Settings:

Some filaments like Silk PLA and PLA + can have a higher flow ratio which leads to tighter joints. You can select from our size options or scale it yourself. We don't rec scaling below 60% unless using a smaller (.2mm) nozzle. Use our Flow Calibration tool if you have issues with the joints fusing or they seem too loose or weak.

These files print in place with no supports needed. Tested on a variety of filaments including PLA, Matte PLA and Silk.

Our settings:

100% scale or more.

0.12 to 0.20mm Layer height

3 walls minimum, 4 recommended

15% infill Gyroid or similar. Avoid Grid infill.Β 

Variable layer height if you have the time

Avoid fuzzy skin as it can weaken non fuzzy areas. At least test first.

Instead of a brim, use primitive discs if needed at the ends of legs or small parts, which can be easily cut off later

**Be aware that different types of filaments shrink and expand and that can affect the quality and flexibility of the print. Silk is known for expanding.

We hope you love this design as much as we loved creating it!

Thanks for joining the CK Tribe! Reach out to us on our Patreon Chat if you have any questions or feedback for us! πŸ–€πŸ™πŸΌ

UPDATES:8/05/24: We created a Flow Calibration tool which will improve your overall print quality and keep joints from fusing, or being too loose. It can be found on our profile.


0Β Likes0Β DownloadsOctober 16, 2024




0Β Likes0Β DownloadsOctober 16, 2024

Instructions

Filament β€’ 0.16mm

MaterialPLA
Layer height0.16 mm
Infill density20 %
SupportsNone
BrimNo
MulticolorAutomatic material system (AMS)
Fuzzy skinOff