I am sharing another clockface that I created to print for an upcoming charity event. This one is of a pirate skull.
For this Model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 225x225mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA BambuLab Basic Beige Transmission Distance: 8
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Blue Gray
At layer #8 (0.72mm) swap to Dark Brown
At layer #20 (1.68mm) swap to Beige for the rest.
