A free set for the Halloween season. Keeping with the theme here is another depiction of Jack and Sally from Nightmare before Christmas. I will likely keep up these free fanart for a while as these are my favorite characters.

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 68.33x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue Gray At layer #14 (1.2mm) swap to Gray At layer #18 (1.52mm) swap to Ivory White for the rest.