Make your own custom lithophane light box with the fun aesthetic of 3D printer infill patterns!

Super simple lithophane light box design while having some fun with Slicer infill patterns for the aesthetics on the walls! Print with various colored pieces for an unique home decor piece or print the walls in your favorite translucent filament and add your favorite LED's of choice!

**PRINT SETTINGS-Roof and Base**
QTY: 1 Roof, 1 Base
Roof and Base pieces should be be support free, infill % at your discretion, 2-3 perimeters
0.2-0.25mm layer height

**PRINT SETTINGS- Infill Wall panels**
QTY: 5 walls (4 sides and 1 top wall)
To get the infill pattern to show through well, you'll need to adjust your top/bottom walls and infill settings.
- Bottom walls: 2-3
- Top walls: 0
- Infill: 5-10% (this is where it gets creative, play around with different infill patterns and percentages!)
- Perimeters: 2
- Layer Height: 0.2mm 

No supports needed

These should be printed flat against the build plate, with the top wall being the highest z-height. Any questions, please let me know. 

**Assembly**
All side wall panels should slide into the grooves in the base, with the panel that goes into the roof should friction fit into place. If your printer tolerances are not consistent, a small amount of glue can keep the top roof panel in place. From there, the roof panel should fit together with the base. You may need to wiggle the roof to line up the openings in the roof for the wall panels to get the roof to sit proper but shouldn't be too difficult. Again, any questions or feedback, please let me know and I will make adjustments if necessary!

Enjoy!

Lithophane Infill Cube

litho infill panel v3.stl

**9/21/24: Updated the openings on the chain link from 2.5mm to 3mm for easier assembly onto the pendent and other chain links. Also added the file for replacement links in case you break the links with the opening during assembly. Thanks to 3DMedicVince for the suggestion and individual link file!** 

Get ready for 3DPrintopia with some bling! The 3DPrintopia bling chain consists of a pendant and a chain link segment. Print multiple chain links and connect them for a long  wearable chain necklace and show off your 3DPrintopia pride!
NOTE: I do not own rights to 3DPrintopia logo. All logo rights belong to the event/organization and is used for entertainment purposes only. No remixes of the file or logo are allowed due to this.

I Recommend printing 3 chain links for desired length/look. Each chain link has each link on its ends with an open slot to connect easily to the pendent hooks and to additional chain links. 

Print setting suggestions:
Pendent can be printed with multiple colors (color swaps) on a single tool printer or and multi tool printer! Recommend slicing/painting alternating gems on the pendent to get the checkerboard look. 

chain link has flat surface to adhere to bed. If having adhesion issues, I suggest a small brim around each link. light supports needed, especially on end links with open slot. 50% > infill recommended.

3DPrintopia Bling Chain

chain link.stl

3derrftopia pendent v2.stl

replacement links.stl

Another fun LED wall panel design inspired by my love for NanoLeaf style wall panels but for much lower cost than the store bought ones! This design has a neat light shadowing effect and a retro lighting aesthetic with the x-shape cutouts.

Easy Setup! Just slide the pyramidal shell into the square base piece, wire up your favorite LED's and controller/software and you're good to go! The square panels allow you to create whatever panel shape you want! They are also lightweight that can make connecting together and wall mounting easy with command strips or doubled sided tape! 

I recommend a bright white PLA for best light diffusion but you can print these in any color if you just want a cool non-LED wall piece

_**RECOMMENDED PRINT SETTINGS:**_
**Square Base:** >80% infill, 2 or more walls, supports underneath wire hole cutouts and corner slots, thick brim (5 or more layers)

**Pyramid shell:** 100% infill, 2 or more walls, supports on buildplate enabled (for wire hole cutouts and corner slots), thick brim (5 or more layers). You shouldn't need supports under the actual pyramid shape.

Any questions on slicing, feel free to leave a comment and reach out! 

Enjoy! 



Jano-Leaf 3.0 LED Light Panels

Jano-Leaf 3.0 Light Panels Shell.stl

No ifs ands or buts, this model's got GUTS!

Inspired from one of my favorite Nickelodeon game shows from the 1990's, GUTS. The Aggro Crag Trophy was the ultimate prize for the contestants who had won the competition and now you can have your very own glowing piece of that radical rock! 

Each piece, including the top hat, base and logo can be printed separately and then assembled together. Use a small amount of adhesive to glue the logo onto the side of the base. You can make a non-LED version or use whatever LED lights you have to create a glowing lit up model!

NOTE: This is a fan recreation. I do not own the rights to the Nickelodeon or the GUTS logos. All rights to the logo artwork go to their respective owners. 

Print Settings:
Base and logo are fairly easy to print, with the logo designed to be able to color swap easily at different layer heights. For the shell, I recommend printing this with many (5+) perimeters and zero infill. It doesn't necessarily need supports underneath but you can print supports if your printer does not handle bridging well. 

Nickelodeon GUTS Aggro Crag Trophy

aggro crag trophy top final.stl

A tall and unique geometric model celebrating the art of fractal design and the ruggedness of a multi-faceted obelisk type object!

Recommended print setting: 15% infill, 4 perimeters, 0.2mm layer height 

Pyramidal Fractal Shard

Pyramidal Fractal Shard.stl

A fun geometric design I came up with last year but hadn't posted to the world until today! Can print the top half in a solid color or print in clear if you want to add your own addressable LED strips like I did for a really unique LED lamp !

The base can be printed pretty easily with only support needed on the underside.

The lamp shade is a solid file that is recommended to be printed with the smooth side on the print bed, 0% infill, 3-4 bottom layers and 2+perimetera to get the desired shell. The thicker the layer perimeters, the better! No support needed on the lamp shade

3D Triangular Prism LED Lamp

3d triangle lamp shade.stl

My design for this year's 3D printed gingerbread house1 This XL sized kit consists of 14 files that you can print and build together to create an awesome gingerbread like structure! A fun project for the holiday season or if you have 3D printers in need of something to do.

Every piece should be support free with the exception of the one roof piece. 15-20% infill per piece is recommended. You can manually set color/filament swaps in the slicer of your choice to get the multi colored effect, or use a tool like a 3d pen to decorate your creation with a “rustic” feel! 

Please do not sell this kit or use it for any selling of any sort without my knowledge or permission. 

2023 Gingerbread House XL DIY Kit

v2 right house rear wall gh3.stl

A gingerbread house design I made this year in 2023 that I have turned into a ornament for the holidays! The XL kit will be posted soon!

Prints in one piece! No support needed except under the front door awning. 

Holiday Gingerbread House Ornament

gingerbread house 3.0 30 percent scale.stl

One of three holiday tree models I've designed for 2023! This model is a holiday tree inspired by the wooden herringbone aesthetic that has been quite popular. 

No supports needed. Can print flat on its side. 15-20% infill recommended. Can scale up or down if needed. 

 Hollow Herringbone Holiday tree

 Hollow Holiday Herringbone Tree.stl

One of three 2023 holiday tree models I've designed this year! Inspired by the spiral tree outdoor lawn decorations. 

Model consists of three parts: the body, the base and the topper. No supports are required on any of the three models. 

The body is recommended to be printed at 100% infill, at least 2 perimeters. Should be flexible enough after the print to bend/manipulate but use caution on over flexing, especially using mor brittle filaments. 

the base should have at least 25% infill and enough perimeters for a solid base/stem.

Topper tolerance should be loose on the top of the stem and can be glued in if needed. The tolerance for the stem should be just enough that the body piece is adjustable but not loose. 


Holiday Spiral Tree

Spiral tree body.stl

One of three 2023 holiday tree models I have designed this year.

A simple an elegant holiday tree with a diamond cut imprinted on the body! 

15-20% Infill recommended. Can be scaled up to make larger!

Diamond Holiday Tree

Diamond holiday tree.stl

diffuser lid for the janoleaf light panels

Janoleaf Lid

The base for my Version 1 homemade LED light panels you can mount on the wall. Check out the viedo attached on how to build these as well as the lid model in my profile to cover each panel

janoleaf LED wall panels

janoleaf base 

Dalgona Candy inspired by the hit Netflix series Squid Game. 5-10% infill recommended.

dalgona crown candy v1.stl

Dalgona candy based off of the hit Netflix series Squid Game. 5-10% infill recommended.

dalgona benchie candy

dalgona benchie candy v5.stl

The star shaped dalgona candy based off of the hit Netflix show Squid Game. 5-10% infill recommended

dalgona star honeycomb candy

The circle shaped dalgona candy based off of the hit Netflix show Squid Game. 5-10% infill recommended

dalgona circle honeycomb candy

The triangle shaped dalgona candy based off of the hit Netflix show Squid Game. 5-10% infill recommended

dalgona triangle honeycomb candy

The umbrella shaped dalgona candy, based off of the hit Netflix show Squid Game. 5-10% infill recommended

dalgona umbrella honeycomb candy

The lid portion of the dalgona candy tin, based off of the hit Netflix show, Squid Game!

dalgona candy tin lid 

The base of the dalgona candy tin. Inspired by the hit Netflix show Squid Game

dalgona candy tin bottom 

My original design vase model as featured on the Fulament Prinitng Contest for JUNE/jULY 2021.  3rd Place Winner. 

Designed and inspired from a wicker basket I found around the house. 

Enjoy!

Woven Vase.STL

-Access to ALL exclusive members only models!

B1G Time Members

lithophane roof.stl

lithophane cube base.stl

litho infill panel.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

B1G_Jano

Achievements

Seedling

Amateur Maker

Rising Star

Up and Coming

Voyager

Pinned models

Lithophane Infill Cube

Lithophane Infill Cube

3DPrintopia Bling Chain

Jano-Leaf 3.0 LED Light Panels

Nickelodeon GUTS Aggro Crag Trophy

Pyramidal Fractal Shard

3D Triangular Prism LED Lamp

2023 Gingerbread House XL DIY Kit

Holiday Gingerbread House Ornament

Hollow Herringbone Holiday tree

Holiday Spiral Tree

Diamond Holiday Tree

Janoleaf Lid

janoleaf LED wall panels

dalgona crown candy v1.stl

dalgona benchie candy

dalgona star honeycomb candy

dalgona circle honeycomb candy

dalgona triangle honeycomb candy

dalgona umbrella honeycomb candy

dalgona candy tin lid

dalgona candy tin bottom

Woven Vase.STL