A fun geometric design I came up with last year but hadn't posted to the world until today! Can print the top half in a solid color or print in clear if you want to add your own addressable LED strips like I did for a really unique LED lamp !

The base can be printed pretty easily with only support needed on the underside.

The lamp shade is a solid file that is recommended to be printed with the smooth side on the print bed, 0% infill, 3-4 bottom layers and 2+perimetera to get the desired shell. The thicker the layer perimeters, the better! No support needed on the lamp shade

3D Triangular Prism LED Lamp

3d triangle lamp shade.stl

3D triangle lamp base.stl

No ifs ands or buts, this model's got GUTS!

Inspired from one of my favorite Nickelodeon game shows from the 1990's, GUTS. The Aggro Crag Trophy was the ultimate prize for the contestants who had won the competition and now you can have your very own glowing piece of that radical rock! 

Each piece, including the top hat, base and logo can be printed separately and then assembled together. Use a small amount of adhesive to glue the logo onto the side of the base. You can make a non-LED version or use whatever LED lights you have to create a glowing lit up model!

NOTE: This is a fan recreation. I do not own the rights to the Nickelodeon or the GUTS logos. All rights to the logo artwork go to their respective owners. 

Print Settings:
Base and logo are fairly easy to print, with the logo designed to be able to color swap easily at different layer heights. For the shell, I recommend printing this with many (5+) perimeters and zero infill. It doesn't necessarily need supports underneath but you can print supports if your printer does not handle bridging well. 

Nickelodeon GUTS Aggro Crag Trophy

guts logo final.stl

aggro crag trophy top final.stl

aggro crag trophy base final.stl

Another fun LED wall panel design inspired by my love for NanoLeaf style wall panels but for much lower cost than the store bought ones! This design has a neat light shadowing effect and a retro lighting aesthetic with the x-shape cutouts.

Easy Setup! Just slide the pyramidal shell into the square base piece, wire up your favorite LED's and controller/software and you're good to go! The square panels allow you to create whatever panel shape you want! They are also lightweight that can make connecting together and wall mounting easy with command strips or doubled sided tape! 

I recommend a bright white PLA for best light diffusion but you can print these in any color if you just want a cool non-LED wall piece

_**RECOMMENDED PRINT SETTINGS:**_
**Square Base:** >80% infill, 2 or more walls, supports underneath wire hole cutouts and corner slots, thick brim (5 or more layers)

**Pyramid shell:** 100% infill, 2 or more walls, supports on buildplate enabled (for wire hole cutouts and corner slots), thick brim (5 or more layers). You shouldn't need supports under the actual pyramid shape.

Any questions on slicing, feel free to leave a comment and reach out! 

Enjoy! 



Jano-Leaf 3.0 LED Light Panels

Jano-Leaf 3.0 Light Panels Shell.stl

Jano-Leaf 3.0 Light Panels Base.stl

**9/21/24: Updated the openings on the chain link from 2.5mm to 3mm for easier assembly onto the pendent and other chain links. Also added the file for replacement links in case you break the links with the opening during assembly. Thanks to 3DMedicVince for the suggestion and individual link file!** 

Get ready for 3DPrintopia with some bling! The 3DPrintopia bling chain consists of a pendant and a chain link segment. Print multiple chain links and connect them for a long  wearable chain necklace and show off your 3DPrintopia pride!
NOTE: I do not own rights to 3DPrintopia logo. All logo rights belong to the event/organization and is used for entertainment purposes only. No remixes of the file or logo are allowed due to this.

I Recommend printing 3 chain links for desired length/look. Each chain link has each link on its ends with an open slot to connect easily to the pendent hooks and to additional chain links. 

Print setting suggestions:
Pendent can be printed with multiple colors (color swaps) on a single tool printer or and multi tool printer! Recommend slicing/painting alternating gems on the pendent to get the checkerboard look. 

chain link has flat surface to adhere to bed. If having adhesion issues, I suggest a small brim around each link. light supports needed, especially on end links with open slot. 50% > infill recommended.

3DPrintopia Bling Chain

chain link.stl

3DPrintopia pendent.stl

replacement links.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

B1G_Jano

Achievements

Seedling

Amateur Maker

Rising Star

Up and Coming

Voyager