tracking pixel
A

Filament Pully for Ender 3 direct drive or similar

by

Azega

Follow
Follow
Remix Model
Like
A
Azega
Image 1 of 11
Filament Pully for Ender 3 direct drive or similar 3d model
2D
3D
Makes
Filament Pully for Ender 3 direct drive or similar 3d model
Filament Pully for Ender 3 direct drive or similar 3d model
Filament Pully for Ender 3 direct drive or similar 3d model
Filament Pully for Ender 3 direct drive or similar 3d model
Filament Pully for Ender 3 direct drive or similar 3d model
Filament Pully for Ender 3 direct drive or similar 3d model
Filament Pully for Ender 3 direct drive or similar 3d model
Filament Pully for Ender 3 direct drive or similar 3d model
Filament Pully for Ender 3 direct drive or similar 3d model
Filament Pully for Ender 3 direct drive or similar 3d model
Filament Pully for Ender 3 direct drive or similar 3d model
This model is restricted by licensing terms. 
2 Likes2 DownloadsDecember 15, 2022
This model is restricted by licensing terms. 


Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5714574.

I converted my enter 3 to direct drive but didn't have room to mount the spool above the printer. This meant the filament came in at a sharp angle and the spool would start rocking as the head pulled the filament back and forth. 

This uses 6mm airsoft BBs as bearings. To assemble, place one half of the hub inside the wheel and fill with BBs, place other half of hub on top then snap the base on top and snap the base on top to lock everything together.. Mount to rail bar with T-nuts. The guide keeps the filament from jumping off and has a gap that can be turned down to allow the filament to be removed without removing from the print head.


2 Likes2 DownloadsDecember 15, 2022




This model is restricted by licensing terms. 
2 Likes2 DownloadsDecember 15, 2022
This model is restricted by licensing terms.