tracking pixel
Profile Image
3dprintbunny
3dprintbunny

3dprintbunny

A 3d print designer, artist and enthusiast. I love experimenting with 3d print techniques.

Want to support me? Save 25% on Supporter and Commercial membership using the code 3DPB25

Follow

Select a membership plan

17% off
Supporter Plus
$8.33
/ month
when billed annually

This supporter plus plan gives you:

  • A MASSIVE thank you for your support
  • Access to a small library of exclusive designs including my Hot Air Balloon and Carousel designs
  • One new exclusive design monthly
  • Opportunity to suggest and request new designs
  • Advice and support
17% off
Commercial Print & Sell
$9.96
/ month
when billed annually

This membership plan gives you the right to print and sell any of the 3DPrintBunny designs available for download on the Thangs website, for the duration of your membership.

You also get:

  • Access to a small library of exclusive designs including my Hot Air Balloon and Carousel designs
  • One new exclusive design monthly
  • this membership does not permit the use of any 3DPrintBunny design to promote products other than the design itself*
Natalie C

Flight String Artwork

by
3dprintbunny
Follow
Follow
Remix Model
3dprintbunny
3dprintbunny
|
Image 1 of 7
Flight String Artwork 3d model
3dprintbunny
3dprintbunny
|
Image 1 of 7
Flight String Artwork 3d model
2D
3D
Makes
Flight String Artwork 3d model
Flight String Artwork 3d model
Flight String Artwork - Too large for Prusa bed, but scaling by 83.33333% worked great. That also made the layer height more compatible at 0.2mm. I think my filament is a little too cheap and a few strings broke, and on some there are tiny segments with under-extrusion.  - 3d model
Flight String Artwork - Didn't fit my MK3+'s bed size nor system preset layer heights, but by scaling by 83.333% it fits and the layer height becomes 0.2mm. - 3d model
Flight String Artwork 3d model
Flight String Artwork 3d model
Flight String Artwork 3d model
This model is restricted by licensing terms. 

An artwork depicting the flight of a bird. The frame thickness and number of string layers increase from left to right as the bird flies.

Print at 0.24mm layer height and if using Bambu Studio set your wall generator to Arachne.

I have include a two part print with strings and frame as well as the complete design. I have also attached a 3mf.

It should scale down ok but any scaling in the z axis needs to be reflected in the layer height.


143 Likes261 DownloadsJanuary 25, 2024


143 Likes261 DownloadsJanuary 25, 2024
This model is restricted by licensing terms.