I designed this simple tray and bezel for an integrated install into my wall. Used for home automation. Print the tray face up with supports & sand the backside if needed. The bezel can be held on

I designed this simple tray and bezel for an integrated install into my wall. Used for home automation. Print the tray…

Wall mount cable grommet for improving the appearance of cables being passed behind walls. Hole size is 1.5" cable cut out in cover plate is .5"

I designed this to run a micro USB cable through the Wall for my Tablet through to the Fridge power outlet. I need it to pass through the wall and designed this. Can be used with Google Home, Cat5

A basic but sturdy through-wall cable box/passthrough with removable/replaceable grommet inserts. Printed with a 0.4mm nozzle, 0.2mm layer height, 3 external layers, 5 top and bottom layers, 20% in

This is a plate to mount one standard marine switch and wall or surface mount it.

This is a media wall plate that I created. It's designed to be used with wall anchors, as a normal screw might shred the cables. It could also be remixed to open at another angle so that doesn't happe

Needed a wall grommet to cover the ugly hole from running a new water line for my new fridge.

Recessed wall plate designed to trim an outlet in the wall behind IKEA Sektion cabinets. Perfect for a garbage disposal outlet under the sink. Cutout in the back panel should be the same size as a sta

I got tired of the RJ45 cables sticking out from the walls and opted to design a recessed version so that one can push furniture up to the wall without damaging the RJ45 plate. I am posting the single

This is a wall grommet, with rainshield dome I made up for my Starlink Dish installation. It takes a 3/4" drill bit to make the proper size hole in your wall. These once the cable is installed, f

I have a mini-split AC unit in my office, and wanted to have a cleaner look than just a mount to the wall bracket that comes with the thermostat. So made a recessed drywall mount for it. It wa

A tidy solution to drilling a hole through the wall to run an ethernet cable from one room to the next. I created a half-plug so you can print two halves to make a hole plug for existing cables.

Installing security cameras and needed a grommet to caulk to the outside of my house to keep things looking tidy. This is for Truecable Cat6 Outdoor rated, 7.4mm OD Cable. Print at 102% to loosen or 9

Simple container so that your night light is flushed with the wall, no more ugly wart sticking out. I have included "box whole" if you want to print in 1 go. You will definitely need support. I also

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4765366. Wall mount cable grommet for improving the appearance of cables being passed behind walls. Hole size is 1.5" cab

This is an adapter printed with PLA and Flexible Filament to give a dog/baby gate more force against the wall and allow it to slip less. There's a recess for the gate's wall mount to fit into it.

Needed a soap and toothbrush holder that would be recessed into the wall. I can't stand stuff laying on my sink so to get it off the sink just 3D print and cut out a hold in your drywall. Lets see wha

A flag grommet wall mount and cover to make your flag look like it's floating on the wall when printed with filament the same color as the flag. Works best by mounting with a nail, or alternatively us

Recessed wall mount for your gen 2 talking circle / speaking clock

Recessed wall plate designed to trim an outlet in the wall behind IKEA Sektion cabinets. Perfect for a garbage disposal outlet under the sink. Cutout in the back panel should be the same size as a sta

Designed for using the AC Infinity Controller 67 fan controller recessed in the wall. I wanted a exhaust fan that would control the humidity in my bathroom automatically since the kids can never s

I remixed this wall grommet because the previous person didn't make it manifold. Uploaded STL to tinkerCAD and then the exported STL worked.

Ball Joint Grommet for cables coming out of drywall

I modeled this so I could mount my TV up higher on the wall, but have the cables come out below to plug in different things (power, network, coax, etc).

I need to create hole to our wall between kitchen and bathroom for connecting wather, electricity and wate to the washing machine. This is the grommet for covering the wall and hole. It's fully parame

For use behind TV, cupboard or anything else where you need more room. Change depth, angle etc to suit your own purpose

Designed up this simple, one piece wall grommet to cover a 1" hole I needed to drill out of my wall to pull coax cable through. I had to use such a large bore because my cable puller head is large. Ho

Hi there, so this is my first thing that I'm going to share with the thingiverse world, I hope that some that needs this as much as me can find this.

Needed a grommet for wiring in a home designed Sprinter RV. This was created to have a sliding cover for easy access. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/t

You can pass your coax right though a wall (no messy, costly, lossy connectors) and make it look really nice by using this wall grommet. Just drill a hole in the plasterboard, per the diameters below.

A grommet to improve the appearance of the entrance of cables being passed behind the wall. For 1.5" hole and .5" cable cutout.

A grommet to improve the appearance of the entrance of cables being passed behind the wall.

I added threads to lock it in the wall better, they sell similar crap on amazon for $15. Easy way to get a cable cleanly through a wall.

I designed this simple tray and bezel for an integrated install into my wall. Used for home automation. Print the tray face up with supports & sand the backside if needed. The bezel can be held on wit

A tidy solution to drilling a hole through the wall to run an ethernet cable from one room to the next. I created a half-plug so you can print two halves to make a hole plug for existing cables.

Customized version of https://www.thingiverse.com/thing:4973258 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=4973258

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5713170. A flag grommet wall mount and cover to make your flag look like it's floating on the wall when printed with fila

10mm wall grommet with a 4x2mm hole for a wire to pass through and 30mm surround to cover the drill hole. I use this to pass the power wire for a Nest Hello doorbell from the outside wall through the

I created a simple single ethernet wall grommet a few years back and it has been very popular. I needed to make an even bigger hole pretty that had quite a few cables running through it - enter the bi

My original integrated dishwasher fixings broke and didn't pull the dishwasher to the cabinet side so it sat square. This print solved the issue. To give the new recessed grommet strength print

A simple spring grommet that snaps into a 1.125" hole in 0.0625 box tubing. I created it as a rub-guard for the cord access hole in the Andymark Lifter in a Box. Prints without support or brim. Ins

Wanted something to allow me to mount devices neatly outside of my structured wiring panel in a row. Profile designed to match common electrical wall plate covers. Mine is only held in with friction

For hiding cables in wall

A recessed wall mount for a Google Home Mini. This mount allows you to mount a Google Home mini into your wall for a more sleek look permanent look. The clamping mechanism works like a standard wall

Customized version of https://www.thingiverse.com/thing:2820714 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2820714

The previous tenant made a lot of holes in the walls to run TV cables. I wanted to tidy them up a bit so I created this super basic wall grommet that includes a flange to hide the mess of the holes.

The original 32 mm grommet has too small hole and adapter to 38 mm hose with nuts that was for filtration was making it even smaller. Decided to make my own grommet.   Inner bigger thread is for

A grommet for feeding the starlink wire through a wall. There is a hard plastic option and a soft one.