Rikon 10-3061 Bandsaw dust collection shroud to help collect dust under the bandsaw table. This utilizes the vents on the side of the saw to provide vacuum suction.

A dust chute and PVC clips designed to get as much airflow as possible within the space allowed under the table of a Rikon 10-324TG band saw. Very likely also compatible with the 10-324 and 10-326.

I made these end caps for the fence rail of a Rikon 14" bandsaw so it will hurt less when I keep bumping into the rail.

This is a two part dust collector for a Rikon 10-326 bandsaw. It may work for other bandsaws but I have not been able to test it on others. Both parts connect to the underside of the table with 12x3mm

A dust chute and PVC clips designed to get as much airflow as possible within the space allowed under the table of a…

Soon after I bought this band saw, I broke the insert guard. To this day, I still don't know how it happened. As a temporary fix, I turned a wooden one on a mini lathe. Almost 2-years went by using

Rikon lathe

A Zero Clearance Insert for the Bandsaw. Model Rikon 10-3061 10" Bandsaw with better dust collection

I recently purchased a Rikon 10-3061 and the top plastic cap had broken clips and would not stay in place. I called the vendor and they told me they'd get a replacement cap ordered. In the meantim

After running my arm into the metal bar, I made a simple cap to cover it. Made one also for the fence.

This is a dust extractor that sits right under the table of the bandsaw and sucks up all the dust

A replacement glide for a Rikon bandsaw's fence. Ours cracked and fell off, and it seemed like a trivial piece to design and print a replacement for. We printed in PLA and it works, but nylon would be

For the Rikon Miter Gauge (Part # 13-920) https://www.rikontools.com/product/13-920 V1 mounts to the side of the saw with double sided tape. It fell off so V2 uses 3 10mm x 5mm magnets and that's

I made these end caps for the fence rail of a Rikon 14" bandsaw so it will hurt less when I keep bumping into the rail. For now it's made from PLA as it doesn't need the extra strength of PETG. After

This is a replacement table insert for a Rikon Bandsaw. It is a little thick and needs to be sanded down a little, or you can scale it down. I like a snug fit so I made it bigger and sand it to a tigh

This is a zero-clearance insert designed for the RIKON 10-305 Bandsaw.

This is a replacement insert for a Valve Housing of a Kuhn-Rikon pressure cooker.

This is an adapter for dust collection of the Rikon 10" bandsaw. It may work for others as well. The stock dust extraction leaves a lot to be desired. The guide bearings under the cast iron top got ja

This is a zero clearance plate to replace the one that came with the Rikon 14" Band Saw. The original has a wide gap which swallows small cutoffs. Save your old plate. You'll need to replace it if yo

A Zero Clearance Insert for the Bandsaw. Model Rikon 10-3061 10" Bandsaw with better dust collection. I included the f3D to be able to change the size to fit your own bandsaw.

Fein vacuum adapter to use with Rikon belt/drum sander, designed in OpenSCAD.

Crank that replaces the Rikon 60-101 stock crank

this is a replacement part of the Kuhn Rikon Pepper Mill

this is a replacement part, in case your retainer breaks due to wear and tear to secure your ring

Replacement throat plate for the Rikon 14" Bandsaw. Has holes to thread for the levelling grub screws. PLA gets a bit melty so I'd reccomend PETG or ABS

Customized version of https://www.thingiverse.com/thing:1246651 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1246651

Zero clearance insert tweaked for my Rikon 14" (deluxe) bandsaw. Note the slot is slightly offset. This might not be the case for your saw - depending on your wheel tires.

Just a simple Band Saw insert for the Rikon 18 inch bandsaw. This insert sits perfectly flush without any modifications. Use 100% infill for best results.

This is to connect a Rockler quick connect handle to your Rikon bench top jointer. It might fit other benchtop jointers also but it was designed around a Rikon 6" bench top jointer. The way it is

The stock hand crank (for dust filter cleaning) is too long and hits the wall (with the angle I installed it at). I designed a shorter one. Features: Smooth turning with a 608 bearing in the handle ~

Effortlessly link your 4-inch port (Laguna SuperMax 16-32 or Rikon Bandsaw 14" 10-326) to the 2-inch port of the DeWalt DXV12P-QT hose (with a 2-inch inner diameter and 2-1/8-inch outer diameter).

This file can be used to create replacement throat plates for a Rikon 14-324 bandsaw that get destroyed over time.

T-Slotted featherboard height up to 150mm (6") for resawing wood

Logos for Powermatic, Proto, Rikon and SawStop

This jointer is sold under a number of brands (WEN, BusyBee, CUTECH, Rikon etc). Some are marketed as having a helical cutter head, while others more correctly refer to them as spiral. Some come with

In the search for a better tool rest for my midi lathe (Rikon 70-1218VS) than the stock one, I came across good options from PSI Woodworking on Amazon. Most reviews were great, the ones that were nega

Vac adapter for Rikon bench sander to rigid shop vac

This is an adapter for my 6 gallon shopvac with a 1.25" hose. My RIKON belt and disk sander (Model#50-112) fit no other attachments to connect to my vacuum so I made this up. The fit to the sander wil

Small holder for salt / pepper mills. The stl as is is modeled for a Kuhn Rikon grinder, but

This insert goes into your face plate and helps you find the center you marked on your turning blank. Currently uses a 1/4" centre punch but you could substitute the centre punch for a drill bit.

Dust collector adapter from 4" port down to 2" hose. This was designed for the Rikon 14" 10-324 bandsaw but should work for other equipment accepting 4" hose.

A holder to fix a thermometer on the rim of a Kuhn Rikon pressure cooker

This kerf plate was designed for a Rikon 10-326 14" bandsaw