I have created this for the Nebula Pad

This was made to hold a camera above the Nebula Pad on a CR-10 SE or Ender 3 V3 KE. Note that this will not work with the stock mount. It was designed to be used with the mount that I created here. It

A filament roller guide for a top mount spool holder.

This is a remix of the OriginalSpeedrive V1- Directdrive Mount with some changes and some optimizations to fit perfectly for CR-6. Installed in my Cr-6 Max and works great. Please make sure the P

I created my own version of the direct drive mount for the printer CR-6 SE, using the cr10 extruder. To mount the 5015 cooler, I cut an m5 thread in the cooler hole and used an m5x20 screw. The orig

This project has been updated with a better remix found ---->>>> here This project was a collaboration between [Michael Bourque](https://www.f

The fan mount in this remix is only useful when using my Orbiter mount remix, as it is designed to be attached to it (https://www.thingiverse.com/thing:4818983)! Also made it a bit lighter by removin

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4542845. I was looking for this foldable filament Spool holder from the CR-6 SE for my Ender 3 Pro. I had to do some twea

A bracket for the cr-6 se spool holder to mount it to the top of the frame.

Adjustable CR Touch mount for the V3 SE allowing for much wider nozzle compatibility.

!!WARNING: WORK IN PROGRESS, NOT YET TESTED. PRINT AT OWN RISK!! Custom toolhead with integrated partcooling fan like the voron afterburner. Uses stock hotend with a BMG in Direct drive config. Hot

Cr-6 se, Cr-6 Max extruder is converted as a direct drive with this project. I recommend doing the printing using Petg. The design consists of two parts. The first is the part where the extruder i

Spacer for the CR TOUCH Creality Ender 3 V3 SE sensor, after installing the Creality K1, KE, K1 Max hotend

This is my remix of takman29's One More Drawer for CR-6 SE.  https://www.thingiverse.com/thing:4632086 I really like this design because it turns unused, almost wasted space into a functional storage

CR Touch Spacer for KE/K1 Hotend with volcano nozzle

Decided the CR-6 SE needed a direct drive that used stock parts. That said, this mount does require a few more pieces. (4) m3 hex nuts (2) m3 6mm button head screws (2) m3 8mm button head screws

CR-6 SE Direct Drive Adapter for BMG Dual Geared Extruder

This is a hotend cover that mounts to the 40x40x10mm hotend cooling fan to cover the hotend and wires when using the Part Cooling Fan Duct Adapter for quiet 40mm fan with PTFE and cable Support (https

This is a holder for the Creality Nebula camera that fits the CR-10 SE (and the Ender 3 S1 Pro, I presume). The model was inspired by <a href="https://www.printables.com/model/644826-crealtiy-cr-10-se

Designed this for my top mount filament on the CR-6 SE. Brings the filament out just a bit and this thing snaps right on to the extruder. No tools necessary. (May find you want a small bit of double s

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4947002. Updates: 2021-09-05 Modification to improve tolerances when fitting Eas

I have found this mount a while ago...can't find the original. I have modified it to fit perfectly on the Creality CR-6 SE. You can use the original screws, takes about 5 minutes to install.

I run my filmanet through a reverse Bowden tube to a drybox and I needed to eliminate my filament guide from on top of my linear rail so I could increase my y-axis travel. This replaces the cable chai

Part cooling fan for the Creality CR6 SE that uses the stock blower flan but directs the airflow closer to the nozzle. Version for 40mm quiet fans: https://www.thingiverse.com/thing:4777287

Cr6 extruder is converted as a direct drive with this project. (V2)

This is a mod to mount your filament sensor for Direct Drive setup on the CR-6 SE.

Part cooling fan for the Creality CR6 SE that uses the stock blower flan but directs the airflow closer to the nozzle. Uses 40mm, quieter fans It can wobble a little bit so I might try the moun

CR-6 SE Filament roller that uses 608-2RS bearings for maximum smoothness! Screws into filament arm the same way the stock one does, but with almost zero friction on the filament roll. Print wi

It's a holder for the nebula camera to go on the side of the CR-10 SE.

For attaching a Creality Nebula Camera to the CR-10 SE

Build plate models for PrusaSlicer, SuperSlicer, OrcaSlicer K1 K1C K1 Max, Ender-3 V2 , Ender-3 V3, Ender-5 S1, CR-10 SE

Update 12 Dec. 2021 I'm currently working on another Z- and X-Axis linear Rail Mount…

Based on the MBOT3D MK2_Rev2.0 by Ahmad Sunardi, I have designed this E3D Revo CR Hotend Mod for Creality's CR-6 SE. It also adds a dual Blower Fan Duct to the printer. The magnetic lid allows for e

modular destine (bambu hottend works fine ) burner 6

Say "Hello!" to the BullHead Mk1 Hotend Cover! I have designed a Dual Blower Fan Duct for Creality CR-6 SE 3D Printer. It allows for better part cooling and increased print speed and quality! **Bill

Ever needed to reinstall the heated bed of an CR6-SE or CR6-MAX? Position the spacer's is a freaking nightmare, that's especially true for the MAX. When the belt came off my CR6-MAX I decided to desig

I just unboxed my CR-6 SE and it works fine, however i would like to use the space left of the printer for something else than the filament. So i just designed this spoolholder for the top left corn

The 6burner V5 has been developed after several demands for a slimmer case with aligned fans. It can be used either in bowden mode or in direct drive by installing a direct drive extruder, 4 differen

This is another take on a hot end cable & bowden tube support for the Creality CR-6 SE.

This "hottend" is an addon for the Creality CR-6 SE 3D printer that allows for faster printing while retaining the use of the printer's sensors.

Creality CR-6 SE Direct Drive Simple You will need just slightly longer M3 screws 2x. Extension of original cables, you can buy or extend the original ones. v1.0 Body - frame for mounting OEM

This fix is for a "Creality CR-6 SE" hotend, based on https://www.thingiverse.com/thing:4220059 and https://www.thingiverse.com/thing:4474868, which is not high enough for the/my CR-6 SE hotend The

I have designed this E3D Revo CR Hotend Mod for Creality's CR-6 SE. It also adds a dual Blower Fan Duct to the printer

Part cooling fan for the Creality CR6 SE that uses the stock blower flan but directs the airflow closer to the nozzle.…

Another Tool Drawer Organizer. This one accommodates some of the tools that did not fit the cutouts in other versions

Here is my ORCA slicer profile for Creality CR-10 SE printer. How to install: -Under printer header goto add/remove printer -Add a generic klipper printer -Goto files/import configs -Import

July 24, 2022 Thingiverse is getting worse and worse by the day. Many features have been broken for ages, and MakerBot…

Made this for my ender 3 because I liked to look of the cr 6 se. Only need to screw the one screw in on the top of it and your good.

Props to the original maker. I remixed the long version of the original drawer to have a flat front and a stronger handle - just like my right-side remix here. https://www.thingiverse.com/thing:470314

Für Deutsch bitte nach unten scrollen. Automatic switch-off after printing, the simplest solution for the CR-6. This is the useful accessory that is missing from the Creality CR-6 SE. A simple