We are THINKTHING STUDIO a R&D studio base in HONG KONG. We developed a lot of inventions, also we have our own brand & products. Because Bambu Lab P1P dosen't support WLAN camera mode. Then I made t

this is a upgrade to my first model as someone asked if I can make it fit a Nest cam  thanks to Matt Blackledge for all the feed back on getting this to fit he's camera and being the guinea pig The

Right after getting my P1P I sold my Ender 3 V2, but kept the Beagle Camera. Since the camera on the P1P isn't that great I made a mount for the Beagle Cam. With the newest firmware it will allow time

Easy mount with magnetic for Thermometer device on the side of P1P and can view from Bambu Camera.  Need three 8x3mm magnetics.     

here is a gopro support for your bambu la p1p 3d printer, it allows you to film your prints from several angles at the same time thanks to its two acroches for gorpo camera

This is a mount for the Rapsberry Pi Camera that stands the camera up so that the camera is shorter.

Quick simple mount i made to use the blink mini camera that can be bought in your area from a hardware store or cheap on amazon around 35 dollars  I made 2 different prints one with a mounting hole a

This is a remix of PrinterPro's Bambu P1P Wyze camera mount. The mount lets the camera sit at an angle and holds it in place with (1) 15mm x 3mm magnet. Mount was modeled from scratch using PrinterPro

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5837183. A redesigned camera mount that fits the Wyze v3 perfectly. I remixed the Original by PrinterPro to make it thin

Since the standard Bambu Cam and LED cannot be ordered from the webstore until April 2023 I searched for alternatives to watch my prints. I found two housings, one was missing the board mounts and th

A redesigned camera mount that fits the Wyze v3 perfectly. I remixed the Original by PrinterPro to make it thinner and use less material. It fits specifically the Wyze v3 Camera very snugly. Print

A redesigned camera mount that fits the Wyze v3 perfectly.  I remixed the Original by PrinterPro to make it thinner and use less material. It fits specifically the Wyze v3 Camera very snugly. Printed

A housing to mount the original Pi Camera module in the rear right corner of the Bambu Labs P1P. The potato cam that comes with the P1P could do with an upgrade so this mount will allow you to instal

This is a mount to attach an Insta360 Go 2 camera to the roll cage of the Arrma Outcast 8S 1/5th scale RC truck. It places the camera below the roof line, so it won't be damaged in a roll over. It ang

**GOOGLE NEST CAM DESK/TABLE/ SHELF ANY FLAT SURFACE MOUNT. CREATED THIS FOR MY BATTERY NEST CAM. TWO PIECE DESIGN, TOP SNAPS INTO BOTTOM FOR A TIGHT FIT, IF YOU LIKE YOU CAN ADD 2 DROPS OF SUPERGLUE

I want to use this camera for live monitoring my Bambu Lab P1P printer when I'm away. So I ripped it apart and build a much smaller custom case for the camera. It has still al the functions like Mic

Thank @3DSourcerer and @BiTN_84310 for their ingenious designs - I only mixed @BiTN_84310's C100 GoPro mount with @3DSourcerer's awesome Bu Stik mounting system :) So, a dirty Tinkercad remix to moun

This is a modified pegboard mount that fits the Wyze Pan V3 camera. You will need the original mounting screw that came with the camera to best secure the camera to the mount.   For better results,

My son created this as I have a number of G3 instants that are required to sit on a windowsill / shelf. This is 12 cm ((4.75 inches) high so that the camera can sit within the overall height if requi

AMAZON BLINK MINI CAMERA WINDOW MOUNT ALLOWS YOU TO USE YOUR BLINK MINI INDOOR CAMERA TO MONITOR THE OUTSIDE THRU YOUR WINDOWS PREVENTS REFLECTION FROM THE GLASS AND GIVE CRYSTAL CLEAR VIEWS PRINTE

Here's a caliper modeled camera fixture for the Bambu Lab camera in the P1P. Supports suggested. This is not a 100% duplication, and has some adjustments to allow easier 3D printing. Note: I would su

so yah, as title says, this is basically a remix I designed.   I took the light bar dimensions and whatnot and then made this model based on my likings.   The one that BL suggests printing points the

A simple Wyze v3 mount for the Bambu Labs P1P. I found that PrinterPro's version did not fit the v3 cam specifically, I believe it is for a different model. I basically just took their model and anoth

Simple wall mount for bambu lab spoolholder

*Bambu Lab P1P Modified LED Mount Original (12/29/2022) *Please see previous version ( https://www.printables.com/model/353180-bambu-lab-p1p-modified-led-mount ) for additional information regarding

The P1P is an awesome printer, but the screen sucks! Particularly the numerous menu items you need to jump thru to do anything, not to mention the annoying inability to have a pre-set temperature butt