Runescape Water Rune in a hybrid Variant.



Water Rune Magnet - Hybrid

Runescape Earth Rune in a hybrid Variant.



hybridWaterMagnet.stl

Earth Rune Magnet - Hybrid

hybridEarthMagnet.stl

Runescape Fire Rune in a hybrid Variant.



Fire Rune Magnet - Hybrid

hybridFireMagnet.stl

Air Rune Magnet - Hybrid

No one had made a 5.7 casing, so I did. 

Also have a solid version which allows infill as it's fairly thin and flimsy otherwise. 

Accurate 5.7 x 28mm casing

5.7x28mm - Solid.stl

This is a small collection holder for spent (or unspent) rounds. 

This particular set is for NATO Small Arms:
https://www.wikiwand.com/en/NATO_cartridge

It's arranged from size of base,  but the height model has it based on height. 

Note: The display photo was printed on fast, which ruined the text. The modeled uploaded here has larger, bold text and is meant to be printed on Normal. 

If you want to print the casings:
50 Cal - https://www.thingiverse.com/thing:3526400
7.62 - https://www.thingiverse.com/thing:4937154
5.56 - https://www.thingiverse.com/thing:3882735?part=0254ee83-fbc1-4402-a4b1-774211a97f1e
9mm - https://www.thingiverse.com/thing:4432631/files
5.7mm - https://social.thangs.com/m/686504


Ammo Collection - NATO Small Arms

This is a small collection holder for spent (or unspent) rounds. 

This particular set is for NATO Small Arms:
https://www.wikiwand.com/en/NATO_cartridge

It's arranged from size of base,  but the height model has it based on height. 

AmmoCollection - NATO Small Arms - Height.stl

NOTE: This is just the wyze Cam part of the mount. The full adjustable mount is here:
https://social.thangs.com/m/603109

Remix of the original Wyze Camera Mount in the adjustable camera mount stl. This one uses a slide mechanism to keep the camera mounted vs using a flat mount. 

v2.1 has slightly larger tolerances for printers with less accuracy. 

For use with:
https://social.thangs.com/m/603109

Wyze v3 Camera Mount - Use with Adjustable Camera Mount

WyzeCamMountv2.1.stl

Use this to measure your inside distance of your seat/cover if needed. Only takes ~4 minutes to print. 
Can snap off the sizes if needed. 

Measurements can be used with:
https://social.thangs.com/m/665326

Toilet Tab Sizer

Hate touching the toilet seat to pull it up? 
This little tab can be attached with some double-sided tape to your seat/cover and allow you to pull up cleanly!

Included several size 'blocks' that go on the bottom of your cover/seat. Download the one that works for you!

Only takes ~25 minutes to print at normal speeds.
(Mine cover was 10mm, seat 12mm)

Can use this 5 min print to measure:
https://social.thangs.com/m/665362

Toilet Seat Tab

toiletSeatTab - 5mm.stl

toiletSeatTab - 0mm.stl

Ramen Bowl Key chain

Basically a little ramen bowl inside of a ring. Why? Who knows. But it's here now. 

Ramen Bowl Ring

Runescape Earth Rune in a rounded Variant.

Earth Rune Magnet - Rounded

Air Rune Magnet - Rounded

Runescape Fire Rune in a rounded Variant.

Fire Rune Magnet - Rounded

Runescape Water Rune in a rounded Variant.

Water Rune Magnet - Rounded

An Air Rune with a magnet slot on the bottom.

Fits a 8x2mm magnet. 

Runescape Air Rune Magnet

A Air Rune with a magnet slot on the bottom.

Fits a 8x2mm magnet. 

A Fire Rune with a magnet slot on the bottom.

Fits a 8x2mm magnet. 

Runescape Fire Rune Magnet

A Water Rune with a magnet slot on the bottom.

Fits a 8x2mm magnet. 

Runescape Water Rune Magnet

An Earth Rune with a magnet slot on the bottom.

Fits a 8x2mm magnet. 

Runescape Earth Rune Magnet

A set of the 4 Core Elemental Runes of Runescape:
- Earth
- Air
- Water
- Fire

Designed in a Hybrid Style (Rounded Sharp/Polygonal edges)

I would suggest enabling Ironing to make the surfaces smooth. 

Runescape Runes - Core - Hybrid Style

hybridAir.stl

A set of the 4 Core Elemental Runes of Runescape:
- Earth
- Air
- Water
- Fire

Designed in a Rounded Style (Looks more Modern - Like a disc)

I would suggest enabling Ironing to make the surfaces smooth. 

Runescape Runes - Core - Rounded Style

roundedWater.stl

A set of the 4 Core Elemental Runes of Runescape:
- Earth
- Air
- Water
- Fire

Designed in a Legacy Style (Looks like the in-game object; blocky; low poly)

I would suggest enabling Ironing to make the surfaces smooth. 

Runescape Runes - Core - Legacy Style

runeAir.stl

My prior phone mount didn't provide as much support as I would've liked. This one fixes that problem by making the angle a bit better, as well as more surface on the back. 

It also provides more room for a charging cable while the prior model was very tight. 

This model is based on:
https://social.thangs.com/m/621429

But completely redesigned from scratch. 

Swivel Phone Stand - 40mm Desk - v2

PhoneMount 2.1 v2.stl

Whipped up a quick phone stand that swivels on a peg so I can turn it to face me!

Swivel Phone Stand - 40mm Desk

phoneMount.stl

A small phone stand I made for my desk. 

Swivel version here:
https://social.thangs.com/m/623640

Desk Phone Mount - 40mm

Based on:
https://thangs.com/mythangs/file/610841

Including a small tray next to it because someone asked for it. 

40mm should fit the side of most printers using 40mm x 40mm brackets, and many wooden desks, etc.

Feel free to remix into whatever size you need.

SD card + USB holder - 40mm Mount - Tray Version

40mmSDMount-SingleTray.stl

tray.stl

Based on:
https://thangs.com/mythangs/file/603131

But using an actual mount as many people don't have tape/etc. 

40mm should fit the side of most printers using 40mm x 40mm brackets, and many wooden desks, etc. 

Feel free to remix into whatever size you need. 

SD card + USB holder - 40mm Mount

See https://social.thangs.com/m/603109 for more details.

Blink Mini Mount for 40mm Adjustable Camera Mount

Beagle Mount for 40mm Adjustable Camera Mount

I mounted mine to my desk via Velcro Tape, but you can use command strips, double sided tape, magnets, etc.

Holds:
- 5 SD Cards
- 4 USB 
- 10 MicroUSB



Desk Mounted SD Card Holder

This is version 2 of my popular Wyze Cam mount. This one is adjustable so you can move it up/down - Closer/Further from the print surface. 

Now with Beagle + Blink Mini Support. (See Links Below)

This mounts to my Neptune 3 Pro, and desk, and should fit any 40mm thick surface. 

Fits Most Printers - Most printers use a 40x40 bar so this should easily fit them. 

Can either print the whole set together (Split up using a mesh-splitter in cura/Prusa) or manually via:
- 1 Wyze Camera Mount (cameraMount.stl)
- 1 Adjustable bar (MovingBar.stl)
- 2 (Optional 4 for stability) (MountPeg.stl)
- 1 Printer/Desk Mount (Mount3.stl)

Camera Mount 2 v3.stl is a 'assembled' version, which you can use CURA/Prusa to disassemble and print if you want them all in a set. 

You can also forego the cameraMount.stl and choose one of the below for different camera options:

Beagle Cam Mount: 
https://social.thangs.com/m/603403

Blink Mini Mount:
https://social.thangs.com/m/604479

Also if you want a easy way to setup wyze w/ Octoprint:
https://community.octoprint.org/t/wyze-cameras-and-octoprint-no-custom-firmware-needed-dec-2022/48106

(No custom firmware needed)

Wyze/Beagle Adjustable 40mm Camera Mount v2 | Fits Most Printers

Camera Mount 2 v3.stl

Losing is fun! 
So go ahead and bring that fun to the Christmas tree. 

Dwarf Fortress Ornament

A simple Ramen Noodle bowl ornament based on my origin cookie cutter. 



Ramen Bowl Christmas Ornament

Simple mount used for my wyze-camera to monitor builds remotely. 
 

Fits a 40mm desk/etc - Raises view by ~140mm from mount bottom. 

Also mounts to side of Neptune 3 Pro and any other 40mm height printers.  (Any that use that bracket with the side-slides)

Wyze Camera Mount - 40mm - 2 Sizes

Simple mount used for my wyze-camera to monitor builds remotely. 
 

Fits a 40mm desk/etc - Raises view by ~140mm from mount bottom. 

Also mounts to side of Neptune 3 Pro and any other 40mm height printers. 

Wyze Camera Mount - 40mm

Wyze Mount_short v5.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5737903.

Based on the Calibration Cube that everyone knows and loves; this cookie cutter is sure to cure those holiday blues by ensuring you whip out your calipers while baking and calibrate your cookie cutting skills. 

Each cookie should be 73mm x 73mm if properly calibrated! 

If your cookies are not calibrated, let me make some suggestions:

Ensure your oven is set to the right temperature, 350*F is the sweet spot for me!
Try cooling your dough in the fridge before putting it on a pan. This helps it hold it's shape while it cooks!
Try not to crowd the pan, leave some space so you can fit those calipers in there!
 

Note: I am not responsible for your Significant Other's adverse reactions to you whipping your calipers out while the family is trying to make cookies. However, this would be a great time to suggest a Christmas present like a new shiny set of calipers. You never know when that .0001mm accuracy will come in handy!

 

Also I'm sorry my cookie didn't come out great - My dough was too crumbly :(

But that just means you have to post a make showing me up!

Calibration Cube Cookie Cutter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5737886.

With this model, you can keep your pages marked even in the scenario your bookmark falls out! 

Comes in a bottom or top pin board and a small or medium size page marker. 

Currently goes up to 999, but can expand another row if needed. 

Recommend printing on .16mm, but also works on .2mm if needed. 

I also attached an optional bottom-pin that fits inside of the push-pin in case that your printer is so exact that the pins do not want to stay attached. 

In all my test prints, they were able to be pushed/pulled with low effort, and stayed in-slot during forceful handling. 

 

You'll likely want 3 push-pins with the option of 3 bottom-pins. 

Note: If the original pins are too big, I've also attached a slightly smaller pin (And long-thin) too.

Page Num Peg Board - Push Pin Bookmark (Top or Bottom Counter)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5737891.

Want your Holidays to be a bit spicy? Maybe Salty? Savory? Look no further than this Ramen Noodle shaped cookie cutter. 

Your family will have no idea your a closet weeb.



Note: The bottom of the steam + the bowl lip is an emboss vs a blade surface. 

Ramen Noodle Bowl Cookie Cutter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5737898.

This cookie cutter is sure to be a hit while you dig your 400th mountain base slowing waiting some giant alligators to come shred your dwarves. 

The edges are 1mm thick, so using a .6mm nozzle should produce a single solid cutting surface. 

Dwarf Fortress Cookie Cutter

Always looking for something to print and fix!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

OtakuMx